S32 Telemetry not showing

[Carapau]

Sorry for the questions tonight but I have another problem.

I am on S32 with firmware 1.41 and it is connected to a Kosmik 160A and to a Rex3 receiver coming off a Spartan FBL controller.

I have set the S32 up correctly as far as I can (which isn't saying much I know!) and at the moment the only telemetry that has appeared on my Jeti DS16 is '2 I motor'. No other telemetry feeds are showing.

Also when I switch the Jeti to is normal view for flying the 'I motor' data just flashes 0.0 even when I spool up.

Thoughts anyone? Many thanks.

[dl7uae]

Please post the header of a log file.

Which JETI telemetry, EX or EXbus? The port of the REX is configured accordingly?

You need to one time let the transceiver do a scan. The device ID of S32 is different from JLog2.6 and of course different from all other devices seen by the terminal (transmitter).

Try also the "jetibox" (text). Guess you have to connect to "Mx" in the box to reach into S32.

Also when I switch the Jeti to is normal view for flying the 'I motor' data just flashes 0.0 even when I spool up.

That points on a bad ground loop. Offset voltage, caused by motor current drawn, appears on the signal ground line and that way adds to the signal.