Tail Kick while Pitch Pumping, need Vbar Settings

[SkyIsTheLimit]

could somone pls post his vbar file or settings. I experiencing tail kicks up to 100 degrees with vbar and savöx 0264mg. Same with the gaui servo.


I had to deactivate the vbar governor because the tail would not hold (gaui esc) was either wagging slow or with more gain fast.

[anthony1]

what headspeed are you running? are your batteries good ? do you have the hsc gears for the tail?
Anthony

[SkyIsTheLimit]

dontknow around 3000 - 3500, not high but with more headspeed more tailkicks, 14 Degree Pitch,

what are hsc gears? Batteries should be fine

[anthony1]

too much pitch, try 12 degrees, the hsc gears are made by one of the helifreak members( hsc is the only name I know him by) , and he makes a set of gears for the x2 which speed up the tail and are generally better being made of aluminium,
https://www.helifreak.com/private.php?do=newpm&u=6970 (link to pm hsc)
if you look at the sticky at the beginning of this forum there is a lot of good info on mods and also a picture of the hsc gears, they do take a while to get here from overseas but they are well worth the wait.
Anthony