Register Now

niccco · 05-25-2017, 02:13 PM

Hi All,

I upgraded to Leggero, I changed boom etc to 770, put on a SAB 770 blade, changed the dampers to hard.

Now I did a test hover and there was really bad vibration on high speed.

I put on the new main shaft that came with the leggero kit, bent?

Hard dampers?

The blades looks to be balanced!

Any suggestion before I spent the night on tacking the issue?

/N

niccco · 05-25-2017, 02:38 PM

Do not rush to much! You need to put back all screws!

If you don´t pun the the screws to the bottom bearing block, you will have vibrations!

/N

shadco · 05-25-2017, 03:50 PM

.

Glad you found the problem

.

TheBum · 05-25-2017, 05:57 PM

I get some canopy vibration with my 770, but it has very few flights on it. I may just need to break in the dampers some more.

cudaboy_71 · 05-26-2017, 12:06 AM

Flying buddy had a bad vibe at low speed (1700). Backed off the blade screws half a turn and it cleared up. Low HS wasn't straightening out the blades.

I know you said high HS. Just info for someone else that might be having vibe issues.

niccco · 05-26-2017, 03:26 PM

Just to report back. I upgraded my Protos Max V2 to Leggero and upgraded to 770 blade, larger motor (Align 850 MX) at the same time.

I am really happy with this conversion! I run low head speed (1400 or so) but just lower the % in the ECS (Hobbywing 160A), I run a 20t pinion, 490kv motor, 12S, I will try the 18t later on. But I am really happy so far.

I am not a smack 3D flyer, so this is perfect for me, super quite, just fly around in eights, rolls, flips, super fun!

/N

05-25-2017, 02:13 PM	#1 (permalink)
niccco Registered Users Join Date: Mar 2016	SOLVED: Upgraded to 770 and Leggero, now terrible vibrations! Hi All, I upgraded to Leggero, I changed boom etc to 770, put on a SAB 770 blade, changed the dampers to hard. Now I did a test hover and there was really bad vibration on high speed. I put on the new main shaft that came with the leggero kit, bent? Hard dampers? The blades looks to be balanced! Any suggestion before I spent the night on tacking the issue? /N Last edited by niccco; 05-25-2017 at 02:36 PM..

05-25-2017, 03:50 PM	#3 (permalink)
shadco Registered Users My HF Map location Join Date: Dec 2011	. Glad you found the problem . __________________ Diabolo 550 Vbar NEO : Diabolo 600 Vbar NEO : Diabolo 700 Vbar NEO: OXY 5 Vbar NEO : Logo 600SX V2 Vbar NEO : SAB G380 Vbar NEO : OXY3 TE : Vbar Control : Citizen 735

05-25-2017, 05:57 PM	#4 (permalink)
TheBum HF Support My HF Map location Join Date: Jul 2007	I get some canopy vibration with my 770, but it has very few flights on it. I may just need to break in the dampers some more. __________________ Alan (just call me "Bum"; no need to be so formal) HeliFreak Support Protos Max Evo 700 (Brain 2), Protos Max V2 770 (iKON 2), Synergy 516 (Brain 2), Oxy 2 (Falcon 12) Graupner MZ-32 Experience is something you gain only after you need it. I wouldn't mind social media so much if it didn't involve people.

05-26-2017, 12:06 AM	#5 (permalink)
cudaboy_71 Registered Users My HF Map location Join Date: Jun 2005	Flying buddy had a bad vibe at low speed (1700). Backed off the blade screws half a turn and it cleared up. Low HS wasn't straightening out the blades. I know you said high HS. Just info for someone else that might be having vibe issues. __________________ ˙ʇı ʞɐǝɹq 'ǝʞoɹq ʇ,uıɐ ʇı ɟı

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-25-2017, 02:38 PM	#2 (permalink)
niccco Registered Users Thread Starter Join Date: Mar 2016	Do not rush to much! You need to put back all screws! If you don´t pun the the screws to the bottom bearing block, you will have vibrations! /N

05-26-2017, 03:26 PM	#6 (permalink)
niccco Registered Users Thread Starter Join Date: Mar 2016	Just to report back. I upgraded my Protos Max V2 to Leggero and upgraded to 770 blade, larger motor (Align 850 MX) at the same time. I am really happy with this conversion! I run low head speed (1400 or so) but just lower the % in the ECS (Hobbywing 160A), I run a 20t pinion, 490kv motor, 12S, I will try the 18t later on. But I am really happy so far. I am not a smack 3D flyer, so this is perfect for me, super quite, just fly around in eights, rolls, flips, super fun! /N

Register Now

Log-in