Register Now

alvaro84 · 03-21-2017, 08:08 PM

hi guys

what do you think about this setup on protos 380 evo?

* Servos: ALIGN DS450M DIGITAL SERVO [HSD45001]

* Tail servo: ALIGN DS455M DIGITAL SERVO [HSD45501]

* Esc: HobbyWing Platinum PRO 60A ESC - V4 Platinum-60A-V4

* Motor : Xnova XTS 2820-890KV- Goblin 380 XN-2820-890

i would like to have your opinion cuz all this electronics
come with the combo p380 evo in my hobby store

thank you for you help !!!

yakky · 03-21-2017, 08:31 PM

Motor and ESC are probably fine, servos, for the same or less money you can get KSTs, which are more durable, reliable and better looking.

vtown nick · 03-23-2017, 08:42 AM

My vote also for kst 215mg v3 on cyclic and a mks tail servo

Michaelinpr · 03-23-2017, 04:01 PM

I agree with the above two posts. KST 215's are leaps and bounds above the Align 450's. The 455 is ok but I have had issues with a couple. Change them out for something better and the problem went away. Not sure what to suggest though as my suggestions would cost a lost more. I have tried the KST mini size tail servo and was not impressed. Same issues as the Align tail servo. Swapped for something "better" and the problem went away.

whitehedr · 03-24-2017, 12:48 AM

That setup will get you flying the EVO. You will love it. I am not a big fan of the KST servos as I have witnessed the output shaft break on several of them. I put Xpert in my machine.

Rog

03-21-2017, 08:08 PM	#1 (permalink)
alvaro84 Registered Users Join Date: Jan 2017	Electronics advice!! hi guys what do you think about this setup on protos 380 evo? * Servos: ALIGN DS450M DIGITAL SERVO [HSD45001] * Tail servo: ALIGN DS455M DIGITAL SERVO [HSD45501] * Esc: HobbyWing Platinum PRO 60A ESC - V4 Platinum-60A-V4 * Motor : Xnova XTS 2820-890KV- Goblin 380 XN-2820-890 i would like to have your opinion cuz all this electronics come with the combo p380 evo in my hobby store thank you for you help !!!

03-23-2017, 08:42 AM	#3 (permalink)
vtown nick Registered Users Join Date: Feb 2013	My vote also for kst 215mg v3 on cyclic and a mks tail servo __________________ Team MSH USA - Cyclone Blades MSH Prôtos 380 Brain 2 MSH Prôtos Max V2 Brain

03-23-2017, 04:01 PM	#4 (permalink)
Michaelinpr Registered Users Join Date: Mar 2009 Location: Puerto Rico (but i am Canadian)	I agree with the above two posts. KST 215's are leaps and bounds above the Align 450's. The 455 is ok but I have had issues with a couple. Change them out for something better and the problem went away. Not sure what to suggest though as my suggestions would cost a lost more. I have tried the KST mini size tail servo and was not impressed. Same issues as the Align tail servo. Swapped for something "better" and the problem went away. __________________ Scorpion Power Systems www.onlyfinehelis.com

03-24-2017, 12:48 AM	#5 (permalink)
whitehedr Registered Users Join Date: Feb 2012	That setup will get you flying the EVO. You will love it. I am not a big fan of the KST servos as I have witnessed the output shaft break on several of them. I put Xpert in my machine. Rog __________________ Retired Old Guy *MOLON LABE* Synergy N7, E5, 516, 766, 556 V-Bar Control Touch (Neon Yellow) Neo all around

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-21-2017, 08:31 PM	#2 (permalink)
yakky Registered Users Join Date: Feb 2015	Motor and ESC are probably fine, servos, for the same or less money you can get KSTs, which are more durable, reliable and better looking.

Register Now

Log-in