Register Now

TheBum · 04-16-2015, 10:36 AM

This thread links to various threads covering specific transmitter setup for neXt. If your transmitter is not included, you may be able to get some ideas for setting it up. If you figure out how to set up a particular transmitter, create a thread describing the procedure and add a link to it in a reply to this thread. I'll stay subscribed so I can add it to the list in the first message.

DX6i Throttle Hold setup: https://www.helifreak.com/showthread.php?t=655203
DX8 Throttle Hold setup: https://www.helifreak.com/showthread.php?t=687619
DX9 setup: https://www.helifreak.com/showthread.php?t=640259
Taranis as a USB joystick (no dongle required): https://www.helifreak.com/showthread...30&postcount=7

Hexperience · 11-07-2015, 08:05 PM

Here's a setup for the Taranis. Just plug in the usb cable AFTER turning on the radio. Windows will see it as a usb joystick. Use the attached .eepe file and calibrate the windows joystick. You can add more channels as buttons, this is just a start but it's what I use.

https://www.helifreak.com/showpost.p...30&postcount=7

Hexperience · 11-07-2015, 08:44 PM

Just to be clear. You don't need a dongle or any other sim cable with the Taranis. Just a plain old usb cable.

Tyler · 01-05-2016, 08:53 PM

How about wireless with vbar control? Various options?

toadiscoil · 01-04-2017, 06:55 AM

Wow. Old thread. I have my DX6 configured with RX2SIM and TH for Autorotations. I will post my setup later for the benefit of the community. Just wanted to post to subscribe to remind me later as I don't have access to my radio now. Will probably have neXt and Heli-X on the same post since they actually use the same radio program since they are bound to the same sat on the RX2SIM.

toadiscoil · 01-04-2017, 12:19 PM

As promised...

https://www.helifreak.com/showthread...64#post7235264

trex_junkie · 11-08-2018, 08:47 PM

can I set this sim up with using v bar touch control with a usb cable?

jhamel · 11-09-2018, 12:44 PM

This 4 part video series demonstrates how I set up a Jeti radio and RX2SIM to work with neXt simulator wirelessly.

neXt flight simulator wireless setup with Jeti radio and RC Ware RX2SIM interface -- Part 1 (18 min 29 sec)

lcc014 · 07-19-2019, 08:13 AM

Any setup instructions for Futaba radio ?

Thanks.

04-16-2015, 10:36 AM	#1 (permalink)
TheBum HF Support My HF Map location Join Date: Jul 2007	Transmitter Setup This thread links to various threads covering specific transmitter setup for neXt. If your transmitter is not included, you may be able to get some ideas for setting it up. If you figure out how to set up a particular transmitter, create a thread describing the procedure and add a link to it in a reply to this thread. I'll stay subscribed so I can add it to the list in the first message. DX6i Throttle Hold setup: https://www.helifreak.com/showthread.php?t=655203 DX8 Throttle Hold setup: https://www.helifreak.com/showthread.php?t=687619 DX9 setup: https://www.helifreak.com/showthread.php?t=640259 Taranis as a USB joystick (no dongle required): https://www.helifreak.com/showthread...30&postcount=7 MeekaMoMo likes this. __________________ Alan (just call me "Bum"; no need to be so formal) HeliFreak Support Protos Max Evo 700 (Brain 2), Protos Max V2 770 (iKON 2), Synergy 516 (Brain 2), Oxy 2 (Falcon 12) Graupner MZ-32 Experience is something you gain only after you need it. I wouldn't mind social media so much if it didn't involve people. Last edited by TheBum; 01-11-2016 at 10:45 AM.. Reason: Added Taranis setup link

11-07-2015, 08:05 PM	#2 (permalink)
Hexperience Registered Users Join Date: Nov 2011	Here's a setup for the Taranis. Just plug in the usb cable AFTER turning on the radio. Windows will see it as a usb joystick. Use the attached .eepe file and calibrate the windows joystick. You can add more channels as buttons, this is just a start but it's what I use. https://www.helifreak.com/showpost.p...30&postcount=7 __________________ Too many Heli's to fit in my sig, current favorites: Whiplash 700 Gasser, Gaui X2, X380 and X480, Trex600e-dfc

11-07-2015, 08:44 PM	#3 (permalink)
Hexperience Registered Users Join Date: Nov 2011	Just to be clear. You don't need a dongle or any other sim cable with the Taranis. Just a plain old usb cable. __________________ Too many Heli's to fit in my sig, current favorites: Whiplash 700 Gasser, Gaui X2, X380 and X480, Trex600e-dfc

01-04-2017, 06:55 AM	#5 (permalink)
toadiscoil Registered Users Join Date: Jul 2015 Location: Racine, WI	Wow. Old thread. I have my DX6 configured with RX2SIM and TH for Autorotations. I will post my setup later for the benefit of the community. Just wanted to post to subscribe to remind me later as I don't have access to my radio now. Will probably have neXt and Heli-X on the same post since they actually use the same radio program since they are bound to the same sat on the RX2SIM. __________________ Goblins: 420 (Buddy) / 500 (Sport) / 570 (Drake) / 700 (Raw KSE) / 700 (Kraken) Gear: NEO / Xnova / Hobbywing YouTube: http://tinyurl.com/toadiscoil Podcast host Skids Up

01-04-2017, 12:19 PM	#6 (permalink)
toadiscoil Registered Users Join Date: Jul 2015 Location: Racine, WI	As promised... https://www.helifreak.com/showthread...64#post7235264 __________________ Goblins: 420 (Buddy) / 500 (Sport) / 570 (Drake) / 700 (Raw KSE) / 700 (Kraken) Gear: NEO / Xnova / Hobbywing YouTube: http://tinyurl.com/toadiscoil Podcast host Skids Up

01-05-2016, 08:53 PM	#4 (permalink)
Tyler Registered Users Join Date: Aug 2004	How about wireless with vbar control? Various options?

11-08-2018, 08:47 PM	#7 (permalink)
trex_junkie Registered Users Join Date: Mar 2012	V bar touch control can I set this sim up with using v bar touch control with a usb cable?

07-19-2019, 08:13 AM	#9 (permalink)
lcc014 Registered Users Join Date: May 2011	Any setup instructions for Futaba radio ? Thanks. MeekaMoMo likes this. __________________ Nano CPx, Hirobo Quark 250 SE, Pro Upper Frame, Talon25, KDE, KST215, DS95i, Mini Vbar 450 Pro (6s), KDE, Lynx, Tarot, RJX, YEP40, KST215 & 515, SK540 465 (6s), Align DFC, HW50AV3, KST315 & 8910A+, SK720BE

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in