Register Now

flyinggoose · 11-08-2015, 04:25 PM

Lhs has a used 700x for $500 and a 600x for $400, jump on it? both bnf

Russell Harding · 11-08-2015, 05:15 PM

Yes and no...

You'll have a flying 700 for unbelievable price.

Both are discontinued (I assume you know this). The 700 is known to have weak tail gears and a somewhat underpowered motor. The motor can be replaced (or maybe you don't fly pro 3D?), but the tail gears I believe were never really fully rectified. It may/will be hard to find parts. The electronics are half decent and will transfer to a new airframe and you'll still have a good deal.

MotorG525 · 11-08-2015, 06:45 PM

Grab them both

mba83 · 11-08-2015, 09:06 PM

Great deals on both if they are bnf or even without fbl. Make sure the 600x has a castle esc and not the bad eflite one. Eflite bec is fine though.

flyinggoose · 11-09-2015, 04:59 AM

The 600x does have a cc in it but only 75 amp, is that a enough?

mba83 · 11-09-2015, 09:14 AM

Yes 75A should be enough for most flying. Though if you do hardcore 3d you may need to upgrade.

snapcrklpop_g · 11-10-2015, 06:57 PM

Under power? Mmm... the Heli is light, it's plenty yeah it can be upgraded mine after some 300 flights has no issues.- & that goes for the gears too! You must shim those to perfection a BNF 700x for $500.00 !!!! Buy IT!

If I don't like it, part it out you're $$$ back out of it servos $150 frame $ 250 esc motor $ 100 beast x $ 100 that's over the $ 500 already!

I like the 700x it's a good buy! That's like .50 or less on the dollar!

Parts are all over eBay ... And here I picked up a second frame for almost no money !

My two cents ...

flyinggoose · 11-11-2015, 08:49 AM

Both sold already

raisinjack · 11-12-2015, 03:08 PM

Quote:

Originally Posted by flyinggoose

Both sold already

are you sure about that?

11-08-2015, 04:25 PM	#1 (permalink)
flyinggoose Registered Users Join Date: Jan 2011	Good buy? Lhs has a used 700x for $500 and a 600x for $400, jump on it? both bnf __________________ Current Align 700L v2 and 500x previous heli's align 600e, 450 pro, blade 600x, 230s, X3,-Blade nano, mcpx bl, 450 3d, mcp x v1 and v2, msr and mcx, 450x and beam v2

11-08-2015, 05:15 PM	#2 (permalink)
Russell Harding Registered Users Join Date: Jan 2013	Yes and no... You'll have a flying 700 for unbelievable price. Both are discontinued (I assume you know this). The 700 is known to have weak tail gears and a somewhat underpowered motor. The motor can be replaced (or maybe you don't fly pro 3D?), but the tail gears I believe were never really fully rectified. It may/will be hard to find parts. The electronics are half decent and will transfer to a new airframe and you'll still have a good deal. __________________ Oxy 3 - MSH Mini Protos - MSH Protos Max 700 - Taranis Thanks to Oxy Heli and MSH-Direct.com Former Username: Code3Medic

11-09-2015, 04:59 AM	#5 (permalink)
flyinggoose Registered Users Thread Starter Join Date: Jan 2011	The 600x does have a cc in it but only 75 amp, is that a enough? __________________ Current Align 700L v2 and 500x previous heli's align 600e, 450 pro, blade 600x, 230s, X3,-Blade nano, mcpx bl, 450 3d, mcp x v1 and v2, msr and mcx, 450x and beam v2

11-10-2015, 06:57 PM	#7 (permalink)
snapcrklpop_g Registered Users Join Date: Sep 2013	700x Under power? Mmm... the Heli is light, it's plenty yeah it can be upgraded mine after some 300 flights has no issues.- & that goes for the gears too! You must shim those to perfection a BNF 700x for $500.00 !!!! Buy IT! If I don't like it, part it out you're $$$ back out of it servos $150 frame $ 250 esc motor $ 100 beast x $ 100 that's over the $ 500 already! I like the 700x it's a good buy! That's like .50 or less on the dollar! Parts are all over eBay ... And here I picked up a second frame for almost no money ! My two cents ... __________________ rc enthusiast" Last edited by snapcrklpop_g; 11-10-2015 at 06:59 PM.. Reason: Grammmerrrr

11-11-2015, 08:49 AM	#8 (permalink)
flyinggoose Registered Users Thread Starter Join Date: Jan 2011	Both sold already __________________ Current Align 700L v2 and 500x previous heli's align 600e, 450 pro, blade 600x, 230s, X3,-Blade nano, mcpx bl, 450 3d, mcp x v1 and v2, msr and mcx, 450x and beam v2

11-08-2015, 06:45 PM	#3 (permalink)
MotorG525 Registered Users Join Date: Jan 2014	Grab them both

11-08-2015, 09:06 PM	#4 (permalink)
mba83 Registered Users Join Date: Jul 2013	Great deals on both if they are bnf or even without fbl. Make sure the 600x has a castle esc and not the bad eflite one. Eflite bec is fine though.

11-09-2015, 09:14 AM	#6 (permalink)
mba83 Registered Users Join Date: Jul 2013	Yes 75A should be enough for most flying. Though if you do hardcore 3d you may need to upgrade.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in