Register Now

Vinger · 03-31-2012, 12:36 AM

Anybody uses them or know about their re-winded motor's performance?

http://slowflyworld.de/artikelauswah...ld~Motortuning

Looks reasonably priced, especially compared to me getting all the tools and materials to do it myself.

powercroco · 03-31-2012, 12:50 AM

why do you think, such commercial rewinded motor will have another performance as a hobby- rewind as far as they use the same number of turns and thickness of copper wire?

may be this is the better idea:
why you don't ask stolla (also from south africa) to help you, instead of sending something around the world?

Vinger · 03-31-2012, 05:45 AM

Stolla a very busy man!! Made contact with them and they will do the rewind to a new motor or you can send in your own, still cheaper than me getting up to speed to do it myself.

Thanks Ralph

Dulgonn · 03-31-2012, 10:36 AM

@ Vinger:

http://www.rc-heli.de/board/showthread.php?t=204512

Scorpion HK 4535 in 4+4x1,95 flat-wire from Holle (slowflyworld) ... perfekt job

He is actually the only one who use this kind of wire.

Cheers

powercroco · 03-31-2012, 11:04 AM

sure?

Dulgonn · 03-31-2012, 11:23 AM

you wind with flat-wire as well ??
Ohhh please Ralph... show us !!!!

Cheers

NRPY · 07-14-2012, 09:15 PM

Finally got my Pyro 520 back from www.slowflyworld.de. I sent it on May 15 from California, USA and recieved it on July 14.

I asked for the motor to be wound with flat wire, but he re-wound it with 1.4mm round wire. Looks like a delta termination too (although I'm not sure about this - it doesn't look anything like the YY termination patterns I've seen on this forum). Slightly disappointed, but I guess he doesn't do YY windings for whatever reason. I guess he just gave me the Pyro "Black Edition" rewind.

I'll give a flight report and some JLogs when I get it installed in my TDR.

03-31-2012, 12:36 AM	#1 (permalink)
Vinger Registered Users My HF Map location Join Date: Sep 2007	Anybody used Slowflyworld rewinds? Anybody uses them or know about their re-winded motor's performance? http://slowflyworld.de/artikelauswah...ld~Motortuning Looks reasonably priced, especially compared to me getting all the tools and materials to do it myself. __________________ Henseleit TDR, TDR2, TDF, TDS, TDSF Kontronik, Scorpion ESC, iChargers, VBar, VControl Old hand at Planks Peter

03-31-2012, 05:45 AM	#3 (permalink)
Vinger Registered Users Thread Starter My HF Map location Join Date: Sep 2007	Stolla a very busy man!! Made contact with them and they will do the rewind to a new motor or you can send in your own, still cheaper than me getting up to speed to do it myself. Thanks Ralph __________________ Henseleit TDR, TDR2, TDF, TDS, TDSF Kontronik, Scorpion ESC, iChargers, VBar, VControl Old hand at Planks Peter

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-31-2012, 12:50 AM	#2 (permalink)
powercroco Registered Users Join Date: Oct 2011	why do you think, such commercial rewinded motor will have another performance as a hobby- rewind as far as they use the same number of turns and thickness of copper wire? may be this is the better idea: why you don't ask stolla (also from south africa) to help you, instead of sending something around the world?

03-31-2012, 10:36 AM	#4 (permalink)
Dulgonn Registered Users Join Date: Dec 2010	@ Vinger: http://www.rc-heli.de/board/showthread.php?t=204512 Scorpion HK 4535 in 4+4x1,95 flat-wire from Holle (slowflyworld) ... perfekt job He is actually the only one who use this kind of wire. Cheers

03-31-2012, 11:04 AM	#5 (permalink)
powercroco Registered Users Join Date: Oct 2011	sure?

03-31-2012, 11:23 AM	#6 (permalink)
Dulgonn Registered Users Join Date: Dec 2010	you wind with flat-wire as well ?? Ohhh please Ralph... show us !!!! Cheers

07-14-2012, 09:15 PM	#7 (permalink)
NRPY Registered Users Join Date: Aug 2009	Finally got my Pyro 520 back from www.slowflyworld.de. I sent it on May 15 from California, USA and recieved it on July 14. I asked for the motor to be wound with flat wire, but he re-wound it with 1.4mm round wire. Looks like a delta termination too (although I'm not sure about this - it doesn't look anything like the YY termination patterns I've seen on this forum). Slightly disappointed, but I guess he doesn't do YY windings for whatever reason. I guess he just gave me the Pyro "Black Edition" rewind. I'll give a flight report and some JLogs when I get it installed in my TDR.

Register Now

Log-in