START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
450 Class Electric Helicopters 450 Class Electric Helicopters manufactured by Align, Tarot, SYMA, Airhog, Chaos, HK and similar. |
|
LinkBack | Thread Tools | Display Modes |
07-13-2017, 02:51 PM | #21 (permalink) |
Registered Users
Join Date: Jan 2014
|
I was thinking about this too, or a possibility that you plugged them into the wrong ports on the FBL
__________________
Oxy 2, Gaui X3 #1, Protos 380, Gaui X5, Synergy 766, Specter 700 Oxy 2/X3/Protos 380/X5/766/Specter 700 Consecutive Successful Flights (Current) = 32/16/12/145/7/50 Consecutive Successful Flights (Max) = 145 |
Sponsored Links | |||
Advertisement |
|
07-13-2017, 11:13 PM | #22 (permalink) |
Registered Users
Join Date: Feb 2013
|
I hope you are pulling TWO leads between the ESC and the motor OR take the BLADES off!!
It this case , removing the blades would be the thing to do....
__________________
DJI MIni, XK K110 120, previously Protos 500, Goblin 570/700. |
07-18-2017, 08:15 AM | #23 (permalink) |
Registered Users
Thread Starter
Join Date: Oct 2014
|
We'll I've tried every possible configuration and also swapped Tx mode so the throttle is on the right. If I can find a good deal, I'd like to try the DX8 or DX9. Sounds like it's a good radio.
|
07-23-2017, 03:52 PM | #24 (permalink) |
Registered Users
Thread Starter
Join Date: Oct 2014
|
We'll I just bought a Spektrum DX8 (SPM8800) with AR8000 from Ebay for $209, used "excellent condition". I figure for that price, why not try the radio. Should receive it Aug 2 so in the mean time
Comes with: DX8 Transmitter (SPM8800, Serial Number:HH205X) AR8000 8-channel 2.4 GHz DSM2 receiver with data port TM1000 Full-range telemetry module Temperature telemetry sensor Flight Pack voltage telemetry sensor Telemetry Y-harness and leads SD card Custom DX8 neck strap 12V DC power supply Last edited by CamSS; 07-23-2017 at 04:14 PM.. |
07-23-2017, 05:25 PM | #25 (permalink) |
Registered Users
Join Date: Nov 2009
|
That will fix it, never liked the F thing. That TX is way easier to manage.
__________________
Align 450Pro 3GX, 500ESP/DFC 3GX, 500L, 550 DFC MicroBeast , Velocity 50 Vbar OS55 HZ-R, D380 DFC D420, G500 Sport Microbeast, All HW V4, X5 stretch 220 Flame Emax Bullet Force V2 VTX |
07-24-2017, 01:29 AM | #26 (permalink) |
Registered Users
Join Date: Jul 2013
|
you will be much better with a spektrum radio on 2.4ghz. had a quick look at the manual but couldnt see anything.
only thing i could think of is that it uses -100 tp +100 values so 0 would actually be 50% I recently changed to a YEP ESC. It has and actual functionion super soft start and wont arm without 0 throttle. and after all that if you happen to give throttle when its armed it spools up so slow its impossible to hurt yourself. Plus ontop of that it can detect jammed blades and cut the power (sadly not quick enough to prevent stripped gears through from a crash) I think if an ESC can burst into live on power up causing serious injury it should be retired and replaced one that has these safety systems. |
08-01-2017, 03:29 PM | #27 (permalink) |
Registered Users
Thread Starter
Join Date: Oct 2014
|
I received the DX8 G1. Very good condition. And here it comes, the throttle stick doesn't move all the way Full and 0 throttle. There are over 2 bars left at the top and bottom that the stick doesn't go past. Same with the elevator but only 1 bar top and bottom. Is this normal?
|
Thread Tools | |
Display Modes | |
|
|