Register Now

Dukesy500 · 02-26-2017, 10:38 AM

Hi all

Im using this on a goblin 380 but it seems to pitch up when im pulling up into stall turns in fff.

Can i run it at 100 and reduce the style to make it not feel robotic?

Many thanks

dominator · 02-26-2017, 08:45 PM

Yes. Pitch up set to 100 is no problem. Try increasing cyclic gain as much as possible without getting cyclic wobbles.

If you still get pitch up problems try raising the cyclic I gain under the advance menu.

Dukesy500 · 02-28-2017, 03:28 PM

Perfect thanks mate!

If I a in a hover high up and then decend quick and catch it. The main rotor tilts right. Like a kick.

Would that be the i gain aswell?

dominator · 02-28-2017, 04:22 PM

Yep. Raise the I gain

02-26-2017, 10:38 AM	#1 (permalink)
Dukesy500 Registered Users Join Date: Jan 2009	Vx1n pitch up comp Hi all Im using this on a goblin 380 but it seems to pitch up when im pulling up into stall turns in fff. Can i run it at 100 and reduce the style to make it not feel robotic? Many thanks

02-28-2017, 03:28 PM	#3 (permalink)
Dukesy500 Registered Users Thread Starter Join Date: Jan 2009	Perfect thanks mate! If I a in a hover high up and then decend quick and catch it. The main rotor tilts right. Like a kick. Would that be the i gain aswell? Last edited by Dukesy500; 03-01-2017 at 06:41 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-26-2017, 08:45 PM	#2 (permalink)
dominator Registered Users Join Date: Dec 2013	Yes. Pitch up set to 100 is no problem. Try increasing cyclic gain as much as possible without getting cyclic wobbles. If you still get pitch up problems try raising the cyclic I gain under the advance menu.

02-28-2017, 04:22 PM	#4 (permalink)
dominator Registered Users Join Date: Dec 2013	Yep. Raise the I gain

Register Now

Log-in