Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Blade Helicopters (eFlite) > Nano CPS



Reply
 
LinkBack Thread Tools Display Modes
Old 06-27-2016, 07:38 AM   #1 (permalink)
Registered Users
 

Join Date: Jan 2016
Default Nano and Taranis

Has any one been successful in flying the Nano with a Taranis and a Spektrum module?

I have a lot of weird issues for example both the collective pitch and throttle responds to the same channel (Chan1)

https://www.helifreak.com/showthread.php?t=748921
__________________
CopterX 450 Pro (DFC + MSH Mini Brain 2) - Blade Nano CP S (Lynx DFC head) - Foam plank (I know!!)
rdeweerd is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 06-27-2016, 10:16 AM   #2 (permalink)
Registered Users
 

Join Date: Apr 2012
Default

yeah, i have an eepe with everything working . the calibration flight is hit or miss but thats really the only issue. i use a module from my old dx6i, connects in dsmx. in fact it was still bound the first time i turned it on in the taranis.
if you bind in non computer tx mode it mixes on the nano 3in1 -- push rudder right when binding
zzyzx is offline        Reply With Quote Quick reply to this message
Old 06-27-2016, 11:45 AM   #3 (permalink)
Registered Users
 

Join Date: Apr 2012
Default

sound should work if you use amber sound pack. rtfm, this took about 15 mins to make. enjoy
Attached Files
File Type: eepe nanoCps.eepe (76.0 KB, 146 views)
zzyzx is offline        Reply With Quote Quick reply to this message
Old 06-27-2016, 03:22 PM   #4 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Jan 2016
Default

Quote:
Originally Posted by zzyzx View Post
if you bind in non computer tx mode it mixes on the nano 3in1 -- push rudder right when binding
I finally found it! My rudder channel was reversed and therefor the right rudder was a left rudder .

Happy flying with the Taranis now !
__________________
CopterX 450 Pro (DFC + MSH Mini Brain 2) - Blade Nano CP S (Lynx DFC head) - Foam plank (I know!!)
rdeweerd is offline        Reply With Quote Quick reply to this message
Old 07-06-2016, 05:45 AM   #5 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Jan 2016
Default

Is it normal that when you use a Taranis with the Blade that you need quite some trim even in stability mode? I now need about 10% trim on aileron and 5% on elevator.

Or can I fix this with a proper swash leveling (I just replaced the swash with a lynx swash and dfc head)
__________________
CopterX 450 Pro (DFC + MSH Mini Brain 2) - Blade Nano CP S (Lynx DFC head) - Foam plank (I know!!)
rdeweerd is offline        Reply With Quote Quick reply to this message
Old 03-28-2018, 10:05 PM   #6 (permalink)
Registered Users
 

Join Date: Feb 2018
Default

I've been trying to figure this out myself. I'm using an IRX4+ module with a Taranis QX7. I downloaded those .eepe config files and when set to DSMX 22ms mode it bound right up to the heli, but the configs were all wrong, the channels were all mixed up. I'm not sure if this is an artifact of the module or if there's a mid-production change to the flight control board that rearranged things. I tried just re-arranging the mix with the existing files but it was still way off so I started from scratch.

Now I have it to the point where the controls are all moving and in the right directions, and it will fly in stability mode, but it absolutely refuses to go into 3D mode or idle up. With the current setup it will spin up with a red LED and negative pitch when the collective stick is below halfway and the switch is set to 3D mode, but as soon as I cross over the the halfway point or somewhere close to it to take off the blue light comes back on and it enters stability mode. It flies fine in stability mode other than the persistent drift but that's another issue. I've been fooling with it for hours.

My channels are arranged like this:
Ch1 - Ail
Ch2 - Ele
Ch3 - Collective
Ch4 - Yaw
Ch5 - Mode
Ch6 - Throttle? This channel has absolutely no effect, it does not spin the rotor up from a stop on its own, and does not change head speed if it's spinning away on the ground with stability mode on.

I'm so confused and frustrated with it now I could very well be overlooking something obvious, but I have no clue. Anyone have any ideas?

My model file:
https://drive.google.com/open?id=1Vd...1Sbi_yCW_z-x0q
varg is offline        Reply With Quote Quick reply to this message
Old 11-04-2018, 08:17 PM   #7 (permalink)
Registered Users
 

Join Date: Nov 2018
Default

Does anybody have any successful eepm/eepe files to get the blade nano cps to fly 3D?
Boyy119 is offline        Reply With Quote Quick reply to this message
Old 01-02-2019, 11:10 PM   #8 (permalink)
Registered Users
 

Join Date: Jun 2018
Default

Hi guys any news on this ? I want to use all the functions
Right now I can fly only in stability mode
Teslank is offline        Reply With Quote Quick reply to this message
Old 12-27-2019, 12:45 AM   #9 (permalink)
Registered Users
 

Join Date: Jun 2019
Location: Appleton WI
Default

Quote:
Originally Posted by Teslank View Post
Hi guys any news on this ? I want to use all the functions
Right now I can fly only in stability mode
So what I've found it's AETR Safe, pitch?
With the red light it is 3d mode, blue is stability, previous person needed to change direction if channel 5. Still tweaking my nano s2 in. But have it flying, panic mixing is throwing me a weird loop yet, gotta understand how the mix works and I can maybe get it working better.
trastek92 is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1