Register Now

alyon187 · 06-28-2016, 09:19 PM

What size is the stock pinion diameter?

Wrencher62 · 07-02-2016, 02:49 PM

Could you clarify your question?

Do you need the motor shaft diameter or are you asking for the tooth count for the stock pinion gear?

alyon187 · 07-02-2016, 06:04 PM

I'm looking for the diameter of the pinion. The motor I'm using has a 6mm shaft on it

Wrencher62 · 07-02-2016, 06:54 PM

My motor is also a 6mm shaft. The pinion is an 18 tooth gear and measures 16mm diameter at the high tooth to tooth measurement.

Hope that helps.

alyon187 · 07-13-2016, 02:57 PM

I was referring to what size shaft the pinion goes on but by the sounds of it the answer is a 6mm shaft.

KingCobra Heli · 07-28-2016, 05:23 PM

A stock 600x kit came with an Eflight Heli 700 motor 500kv and has a 6mm shaft on it. And they came with a stock pinion of 18tooth.

06-28-2016, 09:19 PM	#1 (permalink)
alyon187 Registered Users Join Date: Feb 2015	600x pinion diameter What size is the stock pinion diameter? __________________ Goblin 380 (Spirit), X3 (VBAR), DX9 (I.Y.A.O.Y.A.S.)

07-02-2016, 02:49 PM	#2 (permalink)
Wrencher62 Registered Users Join Date: Apr 2013	Could you clarify your question? Do you need the motor shaft diameter or are you asking for the tooth count for the stock pinion gear? __________________ "Gravity never fails" MCPX BL, 130X, 180CFX, 450X, 600X Goblin 630

07-02-2016, 06:04 PM	#3 (permalink)
alyon187 Registered Users Thread Starter Join Date: Feb 2015	I'm looking for the diameter of the pinion. The motor I'm using has a 6mm shaft on it __________________ Goblin 380 (Spirit), X3 (VBAR), DX9 (I.Y.A.O.Y.A.S.)

07-02-2016, 06:54 PM	#4 (permalink)
Wrencher62 Registered Users Join Date: Apr 2013	My motor is also a 6mm shaft. The pinion is an 18 tooth gear and measures 16mm diameter at the high tooth to tooth measurement. Hope that helps. __________________ "Gravity never fails" MCPX BL, 130X, 180CFX, 450X, 600X Goblin 630

07-13-2016, 02:57 PM	#5 (permalink)
alyon187 Registered Users Thread Starter Join Date: Feb 2015	I was referring to what size shaft the pinion goes on but by the sounds of it the answer is a 6mm shaft. __________________ Goblin 380 (Spirit), X3 (VBAR), DX9 (I.Y.A.O.Y.A.S.)

07-28-2016, 05:23 PM	#6 (permalink)
KingCobra Heli Registered Users Join Date: Jan 2015	A stock 600x kit came with an Eflight Heli 700 motor 500kv and has a 6mm shaft on it. And they came with a stock pinion of 18tooth.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Log-in