APM 2.5+ / 2.9.1b question - HeliFreak
Fun, Learning, Friendship and Mutual Respect START  HERE

Go Back   HeliFreak > R/C Helicopter Support > Multi Rotor Helicopters - Tandem

Multi Rotor Helicopters - Tandem Multi Rotor Helicopters - Tandem

LinkBack Thread Tools Display Modes
Old 08-04-2013, 01:00 AM   #1 (permalink)
Registered Users

Join Date: Mar 2008
Default APM 2.5+ / 2.9.1b question

Hello Folks,

When I fly my factory made 3DR Hexa in Stability mode it seems to fly quite well. When I switch to Loiter mode when there is not any wind it does a good job of staying in position. However, when I try to use Loiter mode when there is a moderate wind (~10mph) it starts off okay but then it gets blown a little off position and over corrects and then continues to over correct until I feel that I need to switch it back to Stabilize mode and take over again.

What settings should I change to have it not over correct? I have not changed any of the stock settings yet that came with 2.9.1b.

Would it help to load the latest version of 3.x firmware? Are the bugs worked out of 3.x now?


T-Rex Cruzer is offline        Reply With Quote
Sponsored Links
Old 08-04-2013, 09:02 AM   #2 (permalink)
Registered Users
Posts: 158

Join Date: Jul 2008
Location: Kansas City, MO

Start by going to the latest code. Normally you don't need to touch the loiter PID's and can just tune the standard PID's, but go to 3.0.0 first; a lot has changed.
APM 2x / TBS Frame / Trex 700e
1.2 GHz video / 900 MHz packet telemetry
oosnoopy is offline        Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Copyright © VerticalScope Inc. All rights reserved.

SEO by vBSEO 3.6.1