Tail wag vbar

[SkyIsTheLimit]

Hi there, got massive problems with the tail. Can anybody post his vbar settings. I am down at 14% gyro gain and tail still wags. Even wagging it still does not seem to hold. I chosed the first servo settings for the gaui guec 95. did try the microheli tail settings still crap. I fly it with governor sensor. Tried this vbar on 2 different x2 both have the same issue. vbar crap? Settings crap?

[joelr]

This thread has some good suggestions on where to start looking.

https://www.helifreak.com/showthread.php?t=636946

You mentioned you tried it on another X2 with the same results, did you try another FBL to see if they gave similar results?

Basically double check to make sure everything is mechanically sound and you don't have too much mechanical gain on the tail. Once that is verified, go through the tail setup in the software and make sure you are getting good numbers back.

Please report back and let us know if you get it resolved or are still having issues.

[SkyIsTheLimit]

Mechanics is ok. Lowered the i value and deactivated the hobbywing governor sensor now the tail holds...

[SkyIsTheLimit]

Has anybody successfully set up the gaui esc with mikado vbar and hobbywing sesnsor?

[Heliwhisperer]

You may want to delete references to Vbar clones here.
Mikado wanted to take action against Will over copyright issues,
Will decided to agree not to have talk about the clones on this site.
Just saying you may be contacted by a moderator.
HW.