START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
FPV and Real time Video Discussions of receiving video in realtime from the aircraft |
|
LinkBack | Thread Tools | Display Modes |
12-29-2012, 10:07 PM | #1 (permalink) |
Registered Users
|
new to FPV question x 2
greetings!
been flying helis a while. got a BOSCAM FPV goggle and transmitter set. I have searched the web (I am a luddite) and can't find : 1) the BOSCAM has a 6 pin data cable for head tracking that is for a Futaba radio. all my radios are JR...is there some adapter cable available?? 2) The BOSCAM came with a cable that goes from the video transmitter box to the actual camera...on the camera side there is a small white connector that plugs in to the camera, and one wire was broken...the connector looks like one that would be used for a JR satellite receiver EXCEPT it has four pin holes instead of three. I am looking for either a replacement cable (the other end has a wide (6 pin I think with 3 wires entrering it) or at least the name of the small (4 pin) connector so I can make my own cable. Thanks in advance!
__________________
AE .50 apache, TT .90 TOW MD500, 2 x JR ergo 60, TT x50 titan, TT 50, TT 30, 3 x MTe325, MSH Mini protos, trex 450 Apache, MT cobra, Airwolf 450, Blade 400, century 50 Bell 47, MT EC135, RADIKAL G20, trex450 MD500, Protos 500 |
Sponsored Links | |||
Advertisement |
|
01-07-2013, 08:47 PM | #2 (permalink) |
Registered Users
Thread Starter
|
Got issue 2 resolved with some snipping, soldering, and hot glue insulation application. Question 1 remains: the Boscam goggles have a cable that has a 6 pin plug on one end that is supposed to plug into a futaba radio (the goggles have a gyro that operates pan/tilt servos on the camera), but I have a JR x9303...do I have to buy a Futaba heli radio or is there an adapter cable that will allow this to work with the JR? Thanks!
__________________
AE .50 apache, TT .90 TOW MD500, 2 x JR ergo 60, TT x50 titan, TT 50, TT 30, 3 x MTe325, MSH Mini protos, trex 450 Apache, MT cobra, Airwolf 450, Blade 400, century 50 Bell 47, MT EC135, RADIKAL G20, trex450 MD500, Protos 500 |
Thread Tools | |
Display Modes | |
|
|