Register Now

crickr1 · 10-11-2013, 07:58 AM

Selling my barely flown nx4 to make room (and some funds) for Protos 700!
Have just over 1 gallon of fuel run through it,flies great, in perfect condition just prefer my electrics.
Gaui NX4 with OS37 motor and pipe,
stretched belt drive (all Gaui parts) to spin 473 blades
Replaced parts:
pitch slider, tail grips and hub (due to failure from first release kit, all parts replaced w/current parts with no problems.)
clutch and bell w/ new liner and bearings (do to a hot start)
Upgrades:
Front tail linkage replaced w/ CF
Lynx cnc fan
cnc boom support
red LG
KBDD tail blades

Sale on hold,, may keep, or relist at later time

NX4 with os37 and pipe, stretched belt drive, Align 520 th servo, Gov sensor, Quick uk header tank, Gryphon auto boost remote glo starter ( this thing is great), Stock gaui 420 blades, stock boom w/ tt , spare gears and bearings, many other spare parts, boom, lg, bearings,as well as many others.
**-also includes 2000 mah nanotech life batt**
shipping, I'll pay the insurance

Savox 1357 rudder I will include for

Shipping to confirmed ppal address 48 states only, no trades

HeliDoc25 · 10-11-2013, 10:11 AM

do you have everything needed to make it TT again?

crickr1 · 10-11-2013, 10:31 AM

Yes, all stock parts and spare gears/bearings as well

crickr1 · 10-13-2013, 04:09 PM

pms replied, I can make a nice package if you want

helislope · 10-14-2013, 04:37 PM

PM Sent

Sent from my SPH-L720 using Tapatalk

crickr1 · 10-18-2013, 10:03 PM

Bump, couple offers,,getting close!

10-11-2013, 07:58 AM	#1 (permalink)
crickr1 Registered Users Join Date: May 2011 Location: New Jersey	........... Selling my barely flown nx4 to make room (and some funds) for Protos 700! Have just over 1 gallon of fuel run through it,flies great, in perfect condition just prefer my electrics. Gaui NX4 with OS37 motor and pipe, stretched belt drive (all Gaui parts) to spin 473 blades Replaced parts: pitch slider, tail grips and hub (due to failure from first release kit, all parts replaced w/current parts with no problems.) clutch and bell w/ new liner and bearings (do to a hot start) Upgrades: Front tail linkage replaced w/ CF Lynx cnc fan cnc boom support red LG KBDD tail blades Sale on hold,, may keep, or relist at later time NX4 with os37 and pipe, stretched belt drive, Align 520 th servo, Gov sensor, Quick uk header tank, Gryphon auto boost remote glo starter ( this thing is great), Stock gaui 420 blades, stock boom w/ tt , spare gears and bearings, many other spare parts, boom, lg, bearings,as well as many others. -also includes 2000 mah nanotech life batt shipping, I'll pay the insurance Savox 1357 rudder I will include for Shipping to confirmed ppal address 48 states only, no trades Attached Thumbnails __________________ Rick, Team pilot , EGODRIFT, KST, Helidirect, Lynx/Oxy Last edited by crickr1; 10-19-2013 at 10:36 AM.. Reason: added

10-11-2013, 10:11 AM	#2 (permalink)
HeliDoc25 Registered Users Join Date: Dec 2012	do you have everything needed to make it TT again? __________________ TEAM IKON TEAM KDE DIRECT

10-11-2013, 10:31 AM	#3 (permalink)
crickr1 Registered Users Thread Starter Join Date: May 2011 Location: New Jersey	Yes, all stock parts and spare gears/bearings as well __________________ Rick, Team pilot , EGODRIFT, KST, Helidirect, Lynx/Oxy

10-13-2013, 04:09 PM	#4 (permalink)
crickr1 Registered Users Thread Starter Join Date: May 2011 Location: New Jersey	pms replied, I can make a nice package if you want __________________ Rick, Team pilot , EGODRIFT, KST, Helidirect, Lynx/Oxy

10-14-2013, 04:37 PM	#5 (permalink)
helislope Registered Users Join Date: May 2011	PM Sent Sent from my SPH-L720 using Tapatalk __________________ North America Team Manager Team Align Enterprise Hobby Facebook Align Part Finder

10-18-2013, 10:03 PM	#6 (permalink)
crickr1 Registered Users Thread Starter Join Date: May 2011 Location: New Jersey	Bump, couple offers,,getting close! __________________ Rick, Team pilot , EGODRIFT, KST, Helidirect, Lynx/Oxy

Register Now

Log-in