Register Now

FLAU · 03-10-2017, 07:38 PM

I have super T8FG and R6208SB. On ch8 i set Condition, so i set RotHD. Gn at INH. Meaning i have to work with BaseGain. When i was using the TX setting the gain values are set at 50%, but the BaseGain is set at 100%. Can i leave it this way or do i have to reduse the basegain to 50% also? Regards Frans.

Dr.Ben · 03-21-2017, 09:03 PM

Leave it alone. Other than when head gain is set in the gyro versus remotely, base gain is used when the model will tolerate or requires more than 100% on the transmitter. In these cases increasing base gain to more than 100% means 100% on the transmitter could be as much as 150% in the gyro.

Ben Minor

03-10-2017, 07:38 PM	#1 (permalink)
FLAU Registered Users Join Date: Dec 2006 Location: Curaçao	Base gain vs RotHD.Gn I have super T8FG and R6208SB. On ch8 i set Condition, so i set RotHD. Gn at INH. Meaning i have to work with BaseGain. When i was using the TX setting the gain values are set at 50%, but the BaseGain is set at 100%. Can i leave it this way or do i have to reduse the basegain to 50% also? Regards Frans.

03-21-2017, 09:03 PM	#2 (permalink)
Dr.Ben Registered Users Join Date: Apr 2004	Leave it alone. Other than when head gain is set in the gyro versus remotely, base gain is used when the model will tolerate or requires more than 100% on the transmitter. In these cases increasing base gain to more than 100% means 100% on the transmitter could be as much as 150% in the gyro. Ben Minor __________________ Team Futaba USA, Team Minicopter/Peak Aircraft, Team Kontronik USA, Kontronik Service USA repair.usa@kontronik.com Please do NOT PM me here on HF.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in