Will DS610 cyclics be enough for 6HV FBL?

[jmcdonald]

As above

[Flydynamics]

They will

[jmcdonald]

Thanks

[1BADAIR]

mine flys great with them

[jmcdonald]

Thats what I like to hear 1BadAir, half the price of Torq and JR

[SilentScope]

some people have the most expensive setup including really expensive servos and they can only do sport flying (which shouldnt stress your servos too much). the align servos will do, even for hard 3d, i have them myself

[1BADAIR]

i think david uses the Savox branded 610's

[jt45255]

yes the align 610's will work just fine.im using the savox 1258tg which is similar to those with great results so far.

[Tribal69]

Yes I am using them too on the swash and they do the job smooth !!!

[jmcdonald]

and AR7200BX is where I'm leaning for the fbl controller... tips, thoughts..

[CeeveeSiN]

the 610s are even up to the task of direct to swash 700Es with no trouble..
fly them.

great bargain servo.

[jt45255]

i am using this fbl controller also and have good results . the heli flys great very stable in flight. easy to install and program.

Originally Posted by jmcdonald

and AR7200BX is where I'm leaning for the fbl controller... tips, thoughts..

[Andy.Kim]

I've had 610's before. They're pretty good for the price.

FWIW, I would recommend Hyperion HP-DH20X-SCD over the 610's. They're both noisy as hell on the bench, about the same specs, and they're a bit cheaper than the 610's. I use them on a 90 FBL Nitro. I also fly hard 3d.

[w4llet]

I have the 610. Works great, smooth and precise....

[lazor 22]

Love 610s.. you can get them so cheap used too

[cupracing]

I use them, and they are on my 7hv too

[skunkworx]

Originally Posted by 1BADAIR

i think david uses the Savox branded 610's

Eh? You have this backwards dude. Savox is the one that makes the Align 610's, not the other way around.

Anyways, yes they will and do work great. However, they won't last like an HV-BLS servo will. If you're not going to run them on more than 6.6V, you should be just fine with them. I beat the daylights of them on 600 and 700 size helis and I've never found a bad one. Especially for the price!

I can second the notion on the Hyperion servos. They're an even better dollar-for-dollar value, just not with as long of a track record. Despite all my (bad) luck with other Hyperion products, their servos seem to be pretty darn good.

[Elios000]

the AR7200BX is great and the Savox/Align servos work fine

[jmcdonald]

Gracias Elios and all. Slowly easing into the build

[Grok]

Sorry for the late entry into this thread, but I just thought of this video. I should pull it out more often. Wish someone would do something similar with a modern electric heli.