KDS Agile A7 Setup

[Ozzy Mozzy]

Hi guys, post up your A7 setups.....

Mine at the moment is

ESC: Kosmik 200
Motor: Scorpion 4525 520kv
Cyclic: KDS 680
Tail: KDS 690
FBL: NEO
Backup: 2s 450 Buffer
Blades: Rail 716 & Cyclone 115
Lipo: 12s 5000

Headspeeds: 1700 1900 2100
Pitch: +-13.5
Weight: 5.4kg

[Mr_Dirt]

ESC: Scorpion Tribunus 200A
Motor: Scorpion 4526 - 520kv
Cyclic: MKS X5 HBL550
Tail: MKS X8 HBL880
FBL: VBar Silverline
Mains: Cyclone 695, Edge 713
Tail: Rotortech 116mm (6s) Align 106mm(12s)
Battery: Gens Ace 6s 5000mAh 45C

Headspeeds: 12s 1900,2100 - 6s 1150
Pitch: +/- 11

[Mr_Dirt]

Originally Posted by Mr_Dirt

ESC: Scorpion Tribunus 200A
Motor: Scorpion 4526 - 520kv
Cyclic: MKS X5 HBL550
Tail: MKS X8 HBL880
FBL: VBar Silverline
Mains: Cyclone 695, Edge 713
Tail: Rotortech 116mm (6s) Align 106mm(12s)
Battery: Gens Ace 6s 5000mAh 45C

Headspeeds: 12s 1900,2100 - 6s 1150
Pitch: +/- 11

Setup has changed. I fly this model exclusively at low head speed.

Motor: Align 700MX 530kv
ESC: Hobbywing Platinum Pro 100A V3
Cyclic: Xpert SM-5401
Tail: Xpert SM-3302
FBL: Mini VBar
Main blades: Edge 713
Tail: Azure power 115mm
Battery: Admiral 4000mAh 6s\Gens Ace 5000mAh 6s

Head speeds: I1 - 950RPM, I2- 1000RPM
Pitch: +/- 13d

[Atomic Skull]

I notice everyone seems to be using a 4525 motor on this model is there not enough room under the canopy for e.g a 4535 or 4540?

[Atomic Skull]

Looks like KDS has already addressed the motor fitment issue by putting a vent hole in the canopy in front of the motor. You can see this in these two videos I found on Youtube:

KDS Models Agile A-7 open box video (2 min 47 sec)

June 28, 2019 (2 min 17 sec)