Align Trex 550X

[Pang93]

Hi i am sorry that i have to post here as I don't know how to use a forum.
Anyways very serious question.
I have a Align Trex 550X with microbeast plus setup. Recently I had a really bad crash due to the one way bearing giving way and becoming 2 way hence it crashed. Now the main problem is that after changing all the damaged parts my servo seems to become really sluggish it was responsive enough before that and really a good helicopter to fly but now everything seems off... Any kind soul has any ideas what happened or has experienced it before? Pardon me i a newbie in this hobby. Many help will be appreciated thank you!

[Felix the cat]

There's a 550 (all brands) dedicated forum down the list. Maybe the mods will relocate it.

Anyways, it could be one or several issues. Whats your BEC voltage like? Assuming your power and architecture are ok, I'd start going over the set up menu (menu LED solid) and ensure all is in spec (servo update rate, center pulse, limits) ect. Down the list and according to your servo specs.

Next I'd re-do / check the parameter menu. (menu LED fast blink) Control styles, stick dead zones ect. Just go down the list.

Hope this helps some.

[Pang93]

Thanks i think my microbeast plus might be broken.....

[Pang93]

A very serious question.
I have a Align Trex 550X with microbeast plus setup. Recently I had a really bad crash due to the one way bearing giving way and becoming 2 way hence it crashed. Now the main problem is that after changing all the damaged parts my servo seems to become really sluggish it was responsive enough before that and really a good helicopter to fly but now everything seems off... Any kind soul has any ideas what happened or has experienced it before? Many help will be appreciated thank you! I have checked the BEC voltage it at 7V the setting for servo refresh rate are set to the highest but nothing seems to works! Is my flight controller damaged?

[Skiddz]

Originally Posted by Pang93

Hi i am sorry that i have to post here as I don't know how to use a forum.
Anyways very serious question.
I have a Align Trex 550X with microbeast plus setup. Recently I had a really bad crash due to the one way bearing giving way and becoming 2 way hence it crashed. Now the main problem is that after changing all the damaged parts my servo seems to become really sluggish it was responsive enough before that and really a good helicopter to fly but now everything seems off... Any kind soul has any ideas what happened or has experienced it before? Pardon me i a newbie in this hobby. Many help will be appreciated thank you!

Originally Posted by Pang93

A very serious question.
I have a Align Trex 550X with microbeast plus setup. Recently I had a really bad crash due to the one way bearing giving way and becoming 2 way hence it crashed. Now the main problem is that after changing all the damaged parts my servo seems to become really sluggish it was responsive enough before that and really a good helicopter to fly but now everything seems off... Any kind soul has any ideas what happened or has experienced it before? Many help will be appreciated thank you! I have checked the BEC voltage it at 7V the setting for servo refresh rate are set to the highest but nothing seems to works! Is my flight controller damaged?

Please do not crosspost. Your two threads have been merged and moved.