Trex 450 Plus DFC BTF battery velcro

[Cman]

Good Day

I finally managed to get my 450 Plus DFC BTF out for some backyard hovering and I noticed a random shake would occur, it seemed to come and go with nothing in common, canopy on or off.

For my last 2 batteries I did not have the Velcro holding the battery down tight I left it loose and the random shakes did not occur for the last 2 batteries. Could this have been the cause? or could it be something else?


thanks C

[nynextel88]

I cannot see how the battery strap would be causing anything like that, unless if when it is tight the ESC wires or battery wires are rubbing on something causing a vibration.

I would see how it's all wired and see if that looks like a possibility.

[Cman]

That must be the case the

It seems to happen the most with the Pulse batteries it must have something to do with how I have the battery lead routed.

I have not put the thing in idle up mode yet, is there anything I need to do before I activate the switch? when I did this with my 250 I suffered an ESC issue where it just shut down. I will check all settings against the manual. its time to progress beyond upright flying.

Thanks for all the support.