550 with mks 9767 & 9780 voltage

[acidla]

Hi Guys,

At what voltage you run that mks combo?

I like to fly a combination of smooth and smack 3D.

Cheers!

[Crashalotjoe]

Originally Posted by acidla

Hi Guys,

At what voltage you run that mks combo?

I like to fly a combination of smooth and smack 3D.

Cheers!

They are both HV servo's so you can run them at anything up to 8.4V. Your ESC/BEC will probably dictate what voltage is available but as long as it's 8.4V or less (and preferably 6.0V or more) you should be fine.

[corrosionate]

Whatever a jive 100lv bec puts out ;-)


Sent from my iPhone using Tapatalk

[acidla]

I was thinking especially for the cyclic what will be the suitable torque/speed.

I will be using the Tribunus bec. Most propably i will set it at 7.4v.

[aziz76]

I have the BEC on the Jive Pro set to 8V with those same servos.

[Crashalotjoe]

Originally Posted by acidla

I was thinking especially for the cyclic what will be the suitable torque/speed.

I will be using the Tribunus bec. Most propably i will set it at 7.4v.

Just run them between 6.0V and 8.4V. The higher the voltage, the higher the speed and torque. You don't set a suitable speed/torque by varying the voltage, the FBL controller deals with all that. I'd run them at 8.4V to get the maximum out of them.

[acidla]

Cool

Cheers guys!