Graphite 33 Plus Aerosol

[jackp1]

could the Graphite 33 Plus Aerosol, cure the ESD on the heli if sprayed onto the tail belt & stop the glitches or brownouts,

[Finless]

It has been reported to solve it yes. Many have used it on ohter helis like Mikado is solving the static issue.

Bob

[jackp1]

iv seen some its a bit expensive, but i think the benefits outway the small cost, as to the cost of fixing a heli does anyone no how often i would have to spray the belt please ?

[mk1spitfire]

Fishing tackle shops sell graphite spray for lubricating the carbon rods.

I don't know if it is the same graphite conductive spray like graphite 33 though.

Electrictronic stores sell various types.

It's not very expensive.

Shipping might be

A can should last a while unless it has use by date.

[jackp1]

iv found a shop that does a 300mm can for a tener, and post is only 2 qid so well worth the buy i think..

[mk1spitfire]

Originally Posted by jackp1

iv found a shop that does a 300mm can for a tener, and post is only 2 qid so well worth the buy i think..

check out (uk)

http://www.rapidonline.com/productin...moduleno=30090

[mike04743]

please send me link can buy Graphite 33 in usa

[psindrup]

Originally Posted by jackp1

iv seen some its a bit expensive, but i think the benefits outway the small cost, as to the cost of fixing a heli does anyone no how often i would have to spray the belt please ?

Expensive? I think it is the cheapest insurance you can buy for your T-rex 500.

I read somewhere that a "treatment" lasts hundreds of flights, but I will probably spray mine much more often.

Peter

[mike04743]

where do you buy it so i can try it

[Tonye53]

I bought mine from at the following link for $11 +$6 shipping.
http://www.graphitestore.com/itemDet.../441/cat_id/28

[wheeler930]

Originally Posted by mike04743

please send me link can buy Graphite 33 in usa

Check this out. Made by Krylon.

http://www.kpg-industrial.com/produc...graphite_lube/

http://rshughes.com/products/075577_...&refcp=froogle

[psindrup]

Originally Posted by wheeler930

Check this out. Made by Krylon.

http://www.kpg-industrial.com/produc...graphite_lube/

http://rshughes.com/products/075577_...&refcp=froogle

I believe it does the same as Graphite 33 - just another product.

Peter

[vicrc]

So what parts do you actually spray? Do you only need to apply it one time?

[jackp1]

here is the link, to the one i found here in the uk... looks like it should do the trick just nicely i think.and as for buying this stuff in the usa, its all over the place.it took me ages to find a link for a uk supplier

http://www.graphitetrading.co.uk/55101.html

[mk1spitfire]

toothed part of belt.

Not set time period. apply when needed, how long, who knows?

10,20,30,50 or 100 flights?????

[mk1spitfire]

Originally Posted by jackp1

here is the link, to the one i found here in the uk... looks like it should do the trick just nicely i think.and as for buying this stuff in the usa, its all over the place.it took me ages to find a link for a uk supplier

http://www.graphitetrading.co.uk/55101.html

or

http://www.rapidonline.com/productin...moduleno=30090

[ElectricSheep]

Originally Posted by wheeler930

Check this out. Made by Krylon.

http://www.kpg-industrial.com/produc...graphite_lube/

http://rshughes.com/products/075577_...&refcp=froogle

Yep, this Sprayon looks pretty similar to Graphit 33. FYI, I just found another US source for it:

http://www.jdindustrialsupply.com/drygrlu.html

I paid $10.61 total, including UPS Ground shipping to California, for a can of this stuff. It should work pretty well (I hope)!