Register Now

HeLiJerSey · 11-30-2009, 10:03 PM

i am looking for reliability, speed, torque and the most part is a great price.
overall i am looking for a good servo with a nice price tag.

how well do they center when setting the servos?

which are better 610 or 620 for cyclics?

also the 650 for tail servo, are they any good, as anybody tested the 650?

i was wondering due to the fact i read about the align electronics..esc, motor, etc.

Al Miessner · 12-01-2009, 05:47 AM

HeLiJerSey
I've been using the DS620s since they came and started a thread about them a while back.
they are awesome cyclic servos for 3D and you'll probably not outfly them

[ame]https://www.helifreak.com/showthread.php?t=87155[/ame]

as for the DS650 , I haven't tried one.. I've always stayed with futaba on the tail. GY611 and GY520s

HeLiJerSey · 12-01-2009, 12:38 PM

good info i appreciate it!! i guess i will try the 620s and and more feedback on the 650 servos.

HeLiJerSey · 12-01-2009, 12:57 PM

i believe the 610 has more toque but slower. the 620 has more speed but less torque.
i think i am right..can someone correct me if i am wrong. i think for cyclics the 610s are more my style. being i don't do anything crazy. mild 3D if that.

Al Miessner · 12-01-2009, 01:07 PM

you are correct with the DS610's having more torque, however the torque values of both servos are more than the 600 requires. that was my reasoning for choosing the 620's. but having tried the 610's as well I was unable to really tell any difference in flight except during caos or continues piro flips where small quick inputs were needed and weren't as crisp as my 620's.
hope that helps

by the way who and where did you find your avatar picture. that is hilarious

HeLiJerSey · 12-01-2009, 01:40 PM

[QUOTE=tick77;1688566]you are correct with the DS610's having more torque, however the torque values of both servos are more than the 600 requires. that was my reasoning for choosing the 620's. but having tried the 610's as well I was unable to really tell any difference in flight except during caos or continues piro flips where small quick inputs were needed and weren't as crisp as my 620's.
hope that helps

make sense for those who do hard 3D. but for me i don`t even come close to piro flips.
they are very close 610@6v 12kg torque and .08 speed; 620@6v 10kg and .07 speed.

i don`t remember where i got it. i can send it to or copy and paste..funny!!

View Poll Results: Align servos 610 620 cyclics, overall if possible
Align 610	9	69.23%
Align 620	4	30.77%
Voters: 13. You may not vote on this poll

11-30-2009, 10:03 PM	#1 (permalink)
HeLiJerSey Join Date: Dec 2008	how are the Align servos 610`s or the 620`s for cyclics i am looking for reliability, speed, torque and the most part is a great price. overall i am looking for a good servo with a nice price tag. how well do they center when setting the servos? which are better 610 or 620 for cyclics? also the 650 for tail servo, are they any good, as anybody tested the 650? i was wondering due to the fact i read about the align electronics..esc, motor, etc. Last edited by HeLiJerSey; 12-01-2009 at 02:18 PM..

12-01-2009, 05:47 AM	#2 (permalink)
Al Miessner Registered Users My HF Map location Join Date: Oct 2007	HeLiJerSey I've been using the DS620s since they came and started a thread about them a while back. they are awesome cyclic servos for 3D and you'll probably not outfly them [ame]https://www.helifreak.com/showthread.php?t=87155[/ame] as for the DS650 , I haven't tried one.. I've always stayed with futaba on the tail. GY611 and GY520s __________________ Flying Hard makes it fun (AnimAL) GrandRC Team Pilot \, Team Ninja Pilot

12-01-2009, 01:07 PM	#5 (permalink)
Al Miessner Registered Users My HF Map location Join Date: Oct 2007	you are correct with the DS610's having more torque, however the torque values of both servos are more than the 600 requires. that was my reasoning for choosing the 620's. but having tried the 610's as well I was unable to really tell any difference in flight except during caos or continues piro flips where small quick inputs were needed and weren't as crisp as my 620's. hope that helps by the way who and where did you find your avatar picture. that is hilarious __________________ Flying Hard makes it fun (AnimAL) GrandRC Team Pilot \, Team Ninja Pilot

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-01-2009, 12:38 PM	#3 (permalink)
HeLiJerSey Thread Starter Join Date: Dec 2008	good info i appreciate it!! i guess i will try the 620s and and more feedback on the 650 servos.

12-01-2009, 12:57 PM	#4 (permalink)
HeLiJerSey Thread Starter Join Date: Dec 2008	i believe the 610 has more toque but slower. the 620 has more speed but less torque. i think i am right..can someone correct me if i am wrong. i think for cyclics the 610s are more my style. being i don't do anything crazy. mild 3D if that.

12-01-2009, 01:40 PM	#6 (permalink)
HeLiJerSey Thread Starter Join Date: Dec 2008	[QUOTE=tick77;1688566]you are correct with the DS610's having more torque, however the torque values of both servos are more than the 600 requires. that was my reasoning for choosing the 620's. but having tried the 610's as well I was unable to really tell any difference in flight except during caos or continues piro flips where small quick inputs were needed and weren't as crisp as my 620's. hope that helps make sense for those who do hard 3D. but for me i don`t even come close to piro flips. they are very close 610@6v 12kg torque and .08 speed; 620@6v 10kg and .07 speed. i don`t remember where i got it. i can send it to or copy and paste..funny!!

Register Now

Log-in