Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Electronics Support > Mikado V-BAR


Mikado V-BAR Mikado V-Stabi/V-BAR Flybarless System Software and Hardware Support


Reply
 
LinkBack Thread Tools Display Modes
Old 02-15-2015, 08:50 AM   #1 (permalink)
Registered Users
 

Join Date: Dec 2006
Default Mini V-Bar Pro HELP

I have a mini v bar Pro Ver 5.3.4 Firmware version is 5.3.4b 05. 12.2012

I went through the set up process from the start (wizard) servos move to diff positions when going through the diffrent tabs and all seems fine when going through each tab. All servos cented when going through tabs in set up mode for cyclic and I put the rudder in normal mode from the front page in the pro setting so when I go to do first hover I can mechanicly set up proper push rod length for a straight (non yaw) hover, before going back in to first page after that and re setting the tail to (lock) in the pro setting for HH.

When I exit the set up menu and get back to the front page which just gives the current information or disconnect laptop like I am ready to fly All the servos move to a NON Center position equally, (cyclic all move to a neg pitch) not to full neg but about 1/2 way to full neg and the rudder servo moves off center also, about one spline distance.

I went back in to set up ( continue ) not ( new set up ) went through all tabs servos again move when going through the tabs but line up perfectly all 90* rudder servo still in normal mode from pro setting in first page all lines up.

Hit the finish set up get back to first page and all servos go back to the ( non 90* position )

It is making me Crazy am I missing something simple here? Any help would be greatly appreciated.
jonesjj is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 02-15-2015, 09:22 AM   #2 (permalink)
HF Support
 
Posts: 41,326
 
My HF Map location
Join Date: Jul 2007
Default

You can't judge anything other than directions of control and correction out of setup mode. Just go fly.
__________________
Alan (just call me "Bum"; no need to be so formal)
HeliFreak Support
Protos Max Evo 700 (Brain 2), Protos Max V2 770 (iKON 2), Synergy 516 (Brain 2), Oxy 2 (Falcon 12)
Graupner MZ-32

Experience is something you gain only after you need it.
I wouldn't mind social media so much if it didn't involve people.
TheBum is offline        Reply With Quote Quick reply to this message
Old 02-15-2015, 09:55 AM   #3 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Dec 2006
Default

OMG! I really feel Stupid! I got it figured out, I am really embaresed now.

I turned on the TX and get alarm if thro stick is not at low so put it at low stop alarm, Ok, I did not put the collective stick back to 50% when I was looking at the collective servos That is why they were at low collective position god I feel like a dumb a$$.

When in normal mode with v-bar it automatically puts in Revo Mix when you move the collective stick up or down, Put the collective in center 50% and the rudder servo arm is Centered.

YEA it was pretty simple, Move the darn collective stick Back to 50% if you want to see the servos at 90*

Jez sorry for taking up band with for something as silly as Not looking back at the TX stick position.
jonesjj is offline        Reply With Quote Quick reply to this message
Old 02-15-2015, 02:59 PM   #4 (permalink)
Registered Users
 
Posts: 1,737
 
My HF Map location
Join Date: Sep 2012
Default

It happens. Main thing is to live and learn.
__________________
Lynx Team Test Pilot
Heli's :mCX2, mSR X, Gaui X3, Logo 480, Goblin 420
Vbar Control
Lu523 is offline        Reply With Quote Quick reply to this message
Old 02-15-2015, 04:58 PM   #5 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Dec 2006
Default

Oh ya.
jonesjj is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1