Newbie waiting on 600 3g to come in and have questions - HeliFreak
Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > 600 Class Nitro Helicopters


600 Class Nitro Helicopters 600 Class Nitro Helicopters manufactured by Align, Tarot, SYMA, Airhog, Chaos, HK and similar.


Reply
 
LinkBack Thread Tools Display Modes
Old 03-22-2010, 02:25 AM   #1 (permalink)
Registered Users
 

Join Date: Mar 2010
Location: Choctaw, OK
Smile Newbie waiting on 600 3g to come in and have questions

OK everyone 1st timer so here it goes...
Fig this is typical newbie story but I am excited about getting into this hobby. I have purchased the following:
T-Rex 600N 3G flybarless
Spectrum DX7se
AR7600
OZ55 and pipe
Also, purchased Rea lFlight G5 and have been flying for about 3 weeks on it. Saving money is always a plus...crash for free. But can hover, inverted-getting better, auto-getting better but Im practicing the basics the most.
I am look for any suggestions on setup and gov,servos, and any info on the DX7se with the AR7600 setup and the Align electronics on this heli. I've read bout the advantages with this Trans and Receiver combo and 11ms latency. Also, should i be concerned the the gyro and
gov from Align and can this receiver and trans. I'm currently watching the build videos on the 600N from Finless-GREAT STUFF! So, glad i found this site.
P.S. ATTN: OTHER NEWBIES JUST A LESSON ALREADY LEARNED---DONT BUY CHEAP CRAP OFF THE NET. YOU GET WHAT U PAY FOR! My lesson was with the
e-Razor 450. Always back orderd on crap that breaks way to easy and RTF should be POS RTC. Luckly i found local club, shop, and experienced pilots that set me straight.
Hurry UPS get my T-Rex 600N 3g here!
Warren G is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 03-22-2010, 11:21 PM   #2 (permalink)
Registered Users
 
Posts: 525
 

Join Date: Jul 2009
Location: Orlando, FL
Default

Hello and welcome, do get real comfortable flying the sim because the 600N is scary if not flown properly.

As for setup, I hear the multigov governor works great because you don't need someone to tach your blades. As for servos the align DS610's work well for cyclic and a 650 works well for the tail. and are affordable. I would get a switchglo for your glow plug.

My 600 FBL is running all align stuff. Align 2n1, align gov, ds610's. It was all part of a combo so I kept it and using it. The align stuff works fine but there's better things out there. If i were to start fresh, either a 7100R receiver and high voltage servos OR what you have with the switchglo, multigov, align servos. Also throw a carbsmart on the engine to take care of engine tuning.

Hope it helps!
rcuser is offline        Reply With Quote Quick reply to this message
Old 03-31-2010, 08:09 PM   #3 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Mar 2010
Location: Choctaw, OK
Default

thanks for the info. I just got it in today and plan on starting on the build and setup tonight. I Appreciate you taking time to respond.
Warren G is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Insurance
Please select your insurance company (Optional)
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
 

SEO by vBSEO 3.6.1