Quad 330X-S DX7 - HeliFreak
Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Gaui Helicopters > 330X


330X Discussion and support of the Gaui Hurricane 330X QuadCopter


Closed Thread
 
LinkBack Thread Tools Display Modes
Old 07-26-2010, 11:15 PM   #1 (permalink)
Registered Users
 
Posts: 285
 
My HF Map location
Join Date: Oct 2009
Location: Annaheim,SK Canada
Angry Quad 330X-S DX7

I hope I can get some help. I have a new 330X-S I got today and I cant get it stable in the air. I have a DX7 that I set up but it's not right. Can someone post all the settings for it with a DX7. I have searched the posts here and have tried what they have said but it won't fly right it go's nose in and right I have trimmed it and it still wont fly right I have programed the ESC's and I have it at mid timing soft start and gov off have the motors right and have set the pot on the GU-344 over and over up a bit down a bit tried setting my expo's and it wont settle down. I have my throttle curve set up for 75% at the top do I set the sub trim to 75%? The gyro I set for 36% and 53%. I have my radio set for heli I tried the acro thing and it was worse. I have only had it since this morning and I'm ready to beat it to death with a hammer. But I hate giving up and know it's the radio setting's. I have the reverse's right it will go up then it's off and I cant control it.
Can anyone help with the settings?
Please help before I take up smoking pot!!!
Joe

Last edited by jmsask; 07-27-2010 at 01:16 AM.. Reason: added
jmsask is offline        Quick reply to this message
Sponsored Links
Advertisement
 
Old 07-26-2010, 11:43 PM   #2 (permalink)
Registered Users
 
Posts: 285
Thread Starter Thread Starter
 
My HF Map location
Join Date: Oct 2009
Location: Annaheim,SK Canada
Red face

I programed the ESC's with a programing card not the radio is this my mistake?
I redid the programing for the ESC's with the radio after I tried the acro setup again and had it working well the I changed the LiPo from a 2S 2100 to a 3S 2200 and it went nuts I could hover it with the 2S but it flips over on the 3S.
I am ready to give up.

Last edited by jmsask; 07-27-2010 at 01:13 AM.. Reason: tried it again
jmsask is offline        Quick reply to this message
Old 07-27-2010, 04:23 PM   #3 (permalink)
Registered Users
 
Posts: 285
Thread Starter Thread Starter
 
My HF Map location
Join Date: Oct 2009
Location: Annaheim,SK Canada
Default

After more searching on other sites I got it thanks.
jmsask is offline        Quick reply to this message
Closed Thread




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
 

SEO by vBSEO 3.6.1