Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Electronics Support > Electric Motors, Gearing, Speed Controls, Gyros, Receivers, and Other Electronics Discussion


Electric Motors, Gearing, Speed Controls, Gyros, Receivers, and Other Electronics Discussion Electric Motors, Gearing, Speed Controls, Gyros, Receivers and Other Electronics Discussion


Reply
 
LinkBack Thread Tools Display Modes
Old 10-10-2010, 05:37 AM   #1 (permalink)
Registered Users
 
My HF Map location
Join Date: Sep 2009
Default CC Phoenix ICE 100A - Don't save parameters

Hello,

I just bought an Outrage 550 with an ESC Castle Creation ICE 100 A. But I don't have the USB cable to make the programming.

- First I've done the throttle "scaling" with travel adjust on the radio (dx6i) => OK

- Then I did the programming as said in the CC user manual, with the radio listening to the BIP BIP BIP... I assigned the parameters for helicopter => All seem OK,

BUT !!!!!!! Next time I power the ESC, the parameters seem to be cleared. For example there's no soft start...
As the ESC doesn't save the parameters ..
And when I enter the programming mode, the BIP BIP are always on parameter choice 1 for all param..

What do I wrong ??? Any idea ??

Thank you
pascal_CH is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 10-11-2010, 12:21 PM   #2 (permalink)
Registered Users
Thread Starter Thread Starter
 
My HF Map location
Join Date: Sep 2009
Default

So....
update in my problem...

a friend lent me the Castle Link USB.. So I've downloaded the parameters... et read it back. It seems OK.

And ESC seems working OK, for example soft start seems activ..

BUT when I enter the programming mode, the BIP BIP are always on parameter choice 1 for all param..
SO I think it's the normal way of working of the ICE ???

Can someone test and confirm this ??

Thank you :o
pascal_CH is offline        Reply With Quote Quick reply to this message
Old 10-11-2010, 05:47 PM   #3 (permalink)
Registered Users
 
Posts: 1,156
 

Join Date: Jul 2009
Default

Get $20 bucks and get the link from your lhs. Dealing with stick programming is a pain in the @$$ if you don't have everything memorized or fully understand the process. Did you buy your ice from a dealer? If so, there should be a coupon for a free link.
__________________
Thumbs Only!
phoenixheli is offline        Reply With Quote Quick reply to this message
Reply

Tags
dont' save, ice 100, problem, programming, radio




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1