Register Now

sutty · 10-20-2011, 12:31 PM

Well this looks nice. Just seen it in the MB FBL forum.

http://www.horizonhobby.com/Products...ID=SPMAR7200BX

Amazing production speed whan you think how recently it was that they teamed up. They must surely have been working on it as a joint venture before hand.

I think I need one for the 600.

Cheers

Sutty

ragge1 · 10-20-2011, 12:39 PM

that was very intresting , I too might need that on my other 500 , I'm thinking of making all my fleet FBL

copterboy · 10-20-2011, 01:05 PM

SAAHHWWEETT!!! Something else to ponsiderate when I eventually make the jump. Would also look good on my 600

sutty · 10-20-2011, 01:08 PM

Yep.

jperkosk · 10-20-2011, 02:53 PM

No way to integrate CP2 for bailout, though...

I'm planning my fleet fbl conversion with bailout implemented.

chansen1953 · 10-20-2011, 03:46 PM

yes jerry.. it looks like it uses all of the channels.. so either fly with cp2 always on or lose it !!

sutty · 10-20-2011, 04:37 PM

Yeah, that's a pity isn't it Jerry, but if it could have been I would have been posting, "Woo hoo, here's one for you Jerry.

" but for obvious reasons I couldn't.

I think I will go for the Rx -> CP2 -> MB route for the 600, but it will have to wait until Christmas. Maybe by then you will have tried it and I can pick your brains about it. I like the idea of the 600 being saveable, and it seems like an interesting little project anyway.

Cheers

Sutty

jperkosk · 10-20-2011, 07:00 PM

Chris, channels aren't the reason here; you just can't put in CP2 after the fbl controller, it has to sit before it. Fbl controller has to be the last thing connected directly to the servos, so CP2 has to go between separate Rx and fbl controller.

Andy, I have everything ready to pop CP2 + MB combo on 700N, as well as on one of the 600Ns, but the work's picked up and I'm not sure I'll manage to get around to it before Christmas... I'll try, but there is also this 6HV on my bench waiting for fbl conversion (with SK720), so I'm completely at loss here.

I'm on a job in Chile at the moment with just mSR and 120SR to play with, and these trips put a brake on all my heli projects...

exblade · 10-20-2011, 08:32 PM

Guys,

Did you notice the Blade 450X that comes with that unit? Pricy, but interesting.

Terry

jperkosk · 10-20-2011, 09:17 PM

Neither is out there yet. Should be an excellent unit, though, it'll be a thrird generation B400. if only it were a torque tube!

Now I really don't need another 450, or do I now?

redbird300 · 10-21-2011, 01:56 AM

Quote:

Originally Posted by jperkosk

Now I really don't need another 450, or do I now?

Right. We only need more (+)700s.

Well, I know I do at least.

10-20-2011, 12:31 PM	#1 (permalink)
sutty Registered Users My HF Map location Join Date: Feb 2008	MB Combo unit Well this looks nice. Just seen it in the MB FBL forum. http://www.horizonhobby.com/Products...ID=SPMAR7200BX Amazing production speed whan you think how recently it was that they teamed up. They must surely have been working on it as a joint venture before hand. I think I need one for the 600. Cheers Sutty __________________ Regards, Sutty BeltEXI, mCX, mSR, 4G3, FBL Trex250SE µB, FBL Trex450Pro µB, FBL Trex550e VX1 Pro, FBL Trex600ESP VX1e, Parkzone P51D, QRX350Pro

10-20-2011, 12:39 PM	#2 (permalink)
ragge1 Registered Users Join Date: Aug 2009	that was very intresting , I too might need that on my other 500 , I'm thinking of making all my fleet FBL __________________ \| Kraken 700 : Neo \| Atom 6HV : Evo \| Raw 580 : Neo \| vbct \|

10-20-2011, 01:05 PM	#3 (permalink)
copterboy Registered Users Join Date: May 2008	SAAHHWWEETT!!! Something else to ponsiderate when I eventually make the jump. Would also look good on my 600 __________________ COPTERBOY DX6i, mSR (SOLD), BeltCP (SOLD), mCPx w solid boom and Rakon Heli Head T-Rex450V2 w.PRO head, Scorp-8 & 45A V2 ESC, CSM4200/S9257, 3xHS65MG E-Flite CX2 - All Microheli/Extreme CNC CF Upgrades TRex600N, Kasama Head, OS50SX

10-20-2011, 01:08 PM	#4 (permalink)
sutty Registered Users Thread Starter My HF Map location Join Date: Feb 2008	Yep. __________________ Regards, Sutty BeltEXI, mCX, mSR, 4G3, FBL Trex250SE µB, FBL Trex450Pro µB, FBL Trex550e VX1 Pro, FBL Trex600ESP VX1e, Parkzone P51D, QRX350Pro

10-20-2011, 02:53 PM	#5 (permalink)
jperkosk Registered Users My HF Map location Join Date: Dec 2009	No way to integrate CP2 for bailout, though... I'm planning my fleet fbl conversion with bailout implemented. __________________ Jerry Trex 700N Pro fbl, 600N Pro x 2, 450SE v1, 250 v2 fbl, Compass 6HV fbl, Blade 450x, 400, 300x, 130x, mCPx, 120SR, mQx, mSR, Rotor Concepts HPQ1, Walkera CB180Q, CB100, Novus FP, CP, Esky Hunter, Big Lama.

10-20-2011, 03:46 PM	#6 (permalink)
chansen1953 Registered Users My HF Map location Join Date: Feb 2010	yes jerry.. it looks like it uses all of the channels.. so either fly with cp2 always on or lose it !! __________________ Chris, DX7 Electronics, Retired BELT CPV2 2 x HK600GT hybrids - + Blade Nano cpx ! DJI/FreeFlight Quadcopter several planks for relax time ! I have not failed, I have just found 1000 ways that do not work.

10-20-2011, 04:37 PM	#7 (permalink)
sutty Registered Users Thread Starter My HF Map location Join Date: Feb 2008	Yeah, that's a pity isn't it Jerry, but if it could have been I would have been posting, "Woo hoo, here's one for you Jerry. " but for obvious reasons I couldn't. I think I will go for the Rx -> CP2 -> MB route for the 600, but it will have to wait until Christmas. Maybe by then you will have tried it and I can pick your brains about it. I like the idea of the 600 being saveable, and it seems like an interesting little project anyway. Cheers Sutty __________________ Regards, Sutty BeltEXI, mCX, mSR, 4G3, FBL Trex250SE µB, FBL Trex450Pro µB, FBL Trex550e VX1 Pro, FBL Trex600ESP VX1e, Parkzone P51D, QRX350Pro Last edited by sutty; 10-20-2011 at 07:45 PM..

10-20-2011, 07:00 PM	#8 (permalink)
jperkosk Registered Users My HF Map location Join Date: Dec 2009	Chris, channels aren't the reason here; you just can't put in CP2 after the fbl controller, it has to sit before it. Fbl controller has to be the last thing connected directly to the servos, so CP2 has to go between separate Rx and fbl controller. Andy, I have everything ready to pop CP2 + MB combo on 700N, as well as on one of the 600Ns, but the work's picked up and I'm not sure I'll manage to get around to it before Christmas... I'll try, but there is also this 6HV on my bench waiting for fbl conversion (with SK720), so I'm completely at loss here. I'm on a job in Chile at the moment with just mSR and 120SR to play with, and these trips put a brake on all my heli projects... __________________ Jerry Trex 700N Pro fbl, 600N Pro x 2, 450SE v1, 250 v2 fbl, Compass 6HV fbl, Blade 450x, 400, 300x, 130x, mCPx, 120SR, mQx, mSR, Rotor Concepts HPQ1, Walkera CB180Q, CB100, Novus FP, CP, Esky Hunter, Big Lama.

10-20-2011, 08:32 PM	#9 (permalink)
exblade Registered Users Join Date: Jan 2009	AR7200BX - Blade 450X Guys, Did you notice the Blade 450X that comes with that unit? Pricy, but interesting. Terry

10-20-2011, 09:17 PM	#10 (permalink)
jperkosk Registered Users My HF Map location Join Date: Dec 2009	Neither is out there yet. Should be an excellent unit, though, it'll be a thrird generation B400. if only it were a torque tube! Now I really don't need another 450, or do I now? __________________ Jerry Trex 700N Pro fbl, 600N Pro x 2, 450SE v1, 250 v2 fbl, Compass 6HV fbl, Blade 450x, 400, 300x, 130x, mCPx, 120SR, mQx, mSR, Rotor Concepts HPQ1, Walkera CB180Q, CB100, Novus FP, CP, Esky Hunter, Big Lama.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in