Throttle curves question

[twoleftthumbs]

Guy's iv'e just had my first day up the field with my replacement (throttle down safety enabled) TotalG installed and have it set in Gview mode and all i can is wow this thing is night and day compared to the old unit that the tail failed on ..many thanks must go to Buzzin Brian for sorting me out yer a star bud.

But my question is what idle up throttle curves do i set on the transmitter (DSX12 using the gov menu controlling the gear chanel)..i have my two headspeeds set in the TotalG's menu and the govenor is set in normal mode.

If i set the idle up curves at 100-100-100 will the totalg's govenor only alow the headspeed up to the 1800 in idle1 and 2000 in idle2 i have in the menu and the curve i have in normal mode or have i got this the wrong way around

thanks for any assistance guy's

[j bomb]

I put in a U or V shaped curve w/ the low point at around 60 or so. That makes sure that the Total G stays in trim lock mode while you're in idle-up and that your headspeed won't go crazy if something bad happens i.e. RPM sensor or magnet coming loose in flight or something like that.

[twoleftthumbs]

Great stuff J Bomb i'll run mine the same ..many thanks