|Register||FAQ||PM||Events||Groups||Blogs||Calendar||Mark Forums Read|
|Electric Helicopters - Only E-Helis *No Commercial Ads - E-helis Only|
||LinkBack||Thread Tools||Display Modes|
|11-26-2018, 12:11 PM||#1 (permalink)|
Join Date: Jan 2010
SOLD -- Oxy 3 stretch with lots of extras
Selling one Oxy 3 airframe with some electronics and a bunch of spares.
3x KST 215mg on cyclic
Hobbywing Platinum pro 40a, model # HW-BQ7001 (w/XT60 connector)
Zeal 285mm CF blades. These look new with no wear on the blade roots that would indicate they've been mounted.
Lynx 285mm plastic blades with a few dings
Oxy main blade holder
And lots of spare parts including:
Oxy main gear, 2 piece
Oxy 50mm tail blade, orange
15t tail shaft
Oxy steel pinion, slant 13t for 3.17mm shaft
Lynx steel pinion, slant 11t Mod 0.5 for 3.17mm shaft
2x Oxy steel spindle shaft (4 in total)
Oxy swash leveler tool
Oxy steel main shaft (3 in total)
Oxy main frame (2 sides)
Does not include motor, FBL controller or tail servo. Only selling the items pictured.
*Canopy has a barely noticeable hairline crack in the paint along the center measuring 3 inches and another small crack on the right side near the grommet from use. Otherwise this heli looks clean and well maintained.
If you play by the rules, you get more rules. There are no rules for people who dont follow the rules.
Last edited by kavic5150; 12-01-2018 at 03:11 PM..