START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
X5 Discussion and support of the Gaui X5 |
|
LinkBack | Thread Tools | Display Modes |
11-12-2010, 11:16 PM | #1 (permalink) |
Registered Users
|
hitech 645?
This servo comes with the kit from infinity is it the wrong servo ie too slow?? I ordered it as is since there was only 1 kit in stock then added a note to sub in some hitec 5625's instead. We'll see what happens.
Last edited by SandMan123; 11-13-2010 at 12:22 AM.. |
Sponsored Links | |||
Advertisement |
|
11-14-2010, 08:07 PM | #2 (permalink) |
Registered Users
Thread Starter
|
No inputs? I need to figure out whether I should be concerned that these servos are coming with my Infiniti kit.
|
11-17-2010, 07:12 AM | #3 (permalink) |
Registered Users
Join Date: May 2006
|
I did the same thing, I bought a combo kit on Ebay but then looked at the specs. The 645 is a very powerful servo but it's optimized for cars. Very slow, .20 sec at 6 volts, and I don't think it's digital. I emailed the seller and asked them to sub HS5625MG which are digital, and .14 sec 6 volts. My heli is very responsive. I never used the 645s, I sent them back.
Hope this helps.
__________________
Helicopters don't fly anyway! Gaui X5 Scorpion 910kv, stock ESC, HS5625MG, GY520/BLS251, T-rex 450 Pro 610m GP780, T-rex 450 SeV2 430xl/HS65HB/Gy401/HSG5084MG/CC35, Blade 130x, Blade MSR & Nano CPX, Futaba 7c/8fg 2.4ghz, Spektrum DX7 |
11-17-2010, 09:31 AM | #4 (permalink) |
Registered Users
Thread Starter
|
Okay, I took your advice from an earlier post and paid 50 to sub the 5625's in my order. Thanks! I did read that someone had used 645's in a 600N and they were descent but I'd rather have the digital ones anyway.
|
11-17-2010, 09:05 PM | #5 (permalink) |
Registered Users
Join Date: May 2006
|
I think you'll be quite happy with them.
__________________
Helicopters don't fly anyway! Gaui X5 Scorpion 910kv, stock ESC, HS5625MG, GY520/BLS251, T-rex 450 Pro 610m GP780, T-rex 450 SeV2 430xl/HS65HB/Gy401/HSG5084MG/CC35, Blade 130x, Blade MSR & Nano CPX, Futaba 7c/8fg 2.4ghz, Spektrum DX7 |
Thread Tools | |
Display Modes | |
|
|