Register Now

sly the dogman · 02-13-2011, 09:25 PM

Finally got the blades spinning, its on a lazy-suzan, but still, you know.
Gotta study Bob's vid on setting the Jr770. It still winter over here so I have
a bit of time in front of me.

And I took the KBDD dampners off for now, had the darness time trying to
take off the spindle, even manage to slap me in the face in the process,
my hand sliped, put the delrin back in, without hurting myself.

belcom · 02-13-2011, 10:38 PM

Hey, good work. I forgot to ask before... is this your first heli?

The 770 is easy to setup and it's an awesome gyro.

sly the dogman · 02-13-2011, 11:15 PM

had a clone 450, 85% Align,
sold it.
second build, second flying season

Jeff_Barrett · 02-14-2011, 12:45 AM

Syl... it's not too cold to fly.

We were out on Lake of the Wood, ON today ... mostly flying helis but there were a couple of planks as well. Started snowing heavily near the end (and a problem with the crank nut coming loose despite thread locker and a lock washer) so I didn't get my big monster into the air... I did get it started though!!

The Atom 500 got it's legs stretched instead.

02-13-2011, 09:25 PM	#1 (permalink)
sly the dogman Registered Users Join Date: May 2009	at last Finally got the blades spinning, its on a lazy-suzan, but still, you know. Gotta study Bob's vid on setting the Jr770. It still winter over here so I have a bit of time in front of me. And I took the KBDD dampners off for now, had the darness time trying to take off the spindle, even manage to slap me in the face in the process, my hand sliped, put the delrin back in, without hurting myself. __________________ We do accept FB parts for Compass 5.5

02-13-2011, 10:38 PM	#2 (permalink)
belcom Registered Users Join Date: Jan 2010	Hey, good work. I forgot to ask before... is this your first heli? The 770 is easy to setup and it's an awesome gyro. __________________

02-13-2011, 11:15 PM	#3 (permalink)
sly the dogman Registered Users Thread Starter Join Date: May 2009	had a clone 450, 85% Align, sold it. second build, second flying season __________________ We do accept FB parts for Compass 5.5

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-14-2011, 12:45 AM	#4 (permalink)
Jeff_Barrett Registered Users Join Date: Aug 2010	Syl... it's not too cold to fly. We were out on Lake of the Wood, ON today ... mostly flying helis but there were a couple of planks as well. Started snowing heavily near the end (and a problem with the crank nut coming loose despite thread locker and a lock washer) so I didn't get my big monster into the air... I did get it started though!! The Atom 500 got it's legs stretched instead.

Register Now

Log-in