Register Now

Trooper11040 · 07-02-2011, 08:56 AM

This is for a pretty new X50...Has only 3 flights on it...sadly though, the 3rd flight, I lost my tail servo control, and it hit the ground during a hover. Every part had been replaced that was damaged except the canopy (Had only scratches) and the Pipe (Has a small dent on the side) The engine is a RL53H with the redline hi-flo pipe that comes with the set. Cyclic servos are DS610's which are still in excellent condition. It has a GY401 and Brand new, never flown S9254 Tail Servo. I also have on there a PushGlo, and a castle BEC for the electronics. Also has an AR8000 for the rX...I might keep that, but depending on the price i can get for it, ill throw it in. This heli is not for me...I am not into the Nitro scene at all...A lot more work then I thought, and my loss will be your gain. The heli is still in excellent condition...Just needs a new home, and someone who will know what the hell they are doing with Nitro. Pics will be added in a little bit. I am not honestly sure what I should make a starting price, so I'll leave it up to ya'll....and please no low ball offers...this is a serious piece of equipment. Also, local pickup preferred, but we can work some sort of CONUS shipping deal with the sale...I am also willing to part out if I have too...

Trooper11040 · 07-03-2011, 04:09 PM

Trooper11040 · 07-03-2011, 08:49 PM

Even willing to trade for a Trex 550

MXRACERX43 · 07-03-2011, 08:52 PM

I offered you some help before. Instead of loosing your ass $ on selling, you should make a trip up to our field for some help. There is nothng difficult about nitro. Sure we could get you squared away in an afternoon.

Trooper11040 · 07-03-2011, 09:51 PM

I'm looking more for a 550 or 500 FBL...I have a trex 600 that I fly...no need for 2 lol

Trooper11040 · 07-03-2011, 11:53 PM

More pictures as promised:

Trooper11040 · 07-04-2011, 10:54 PM

Id like to get rid of this soon...All reasonable offers will be accepted!

Trooper11040 · 07-09-2011, 12:44 AM

Bump...no bites?? Not even to part out?

geomecc · 07-09-2011, 08:13 AM

500 with out rx and gyro

DG40 · 07-13-2011, 02:14 PM

trades?

Trooper11040 · 07-13-2011, 04:36 PM

Possibly...pm me

Trooper11040 · 07-14-2011, 11:10 AM

I guess it's time to part this heli out...

GY401 Gyro
S9254 Servo
3 DS610's
RL53 with stock muffler
Airframe

bshinn · 07-14-2011, 12:35 PM

How much for the airframe alone?

Trooper11040 · 07-16-2011, 01:39 PM

I'm surprised no decent offers on this helicopter! I should have went Align! It would be gone already!!

I'll sell it for 800 minus gyro, tail servo and Rx...

Trooper11040 · 07-18-2011, 09:31 AM

Trooper11040 · 07-18-2011, 10:23 AM

750 no Rx, no tail servo or gyro

Trooper11040 · 07-25-2011, 08:51 PM

Trooper11040 · 08-14-2011, 09:17 AM

Bump...forgot I had this post! I need to get rid of this...need the $$!

jtrides65 · 08-14-2011, 09:30 AM

i got a original knockabout, 8 flights, i flown it once, too big for me, scares me..lol interested? its got the magazine that had the review done on it with it, pics and everything.

Trooper11040 · 08-14-2011, 10:53 PM

Def looking more for $$ then a trade...I'm trying to pay off the dreaded debt this hobby has put me in...

07-02-2011, 08:56 AM	#1 (permalink)
Trooper11040 My HF Map location Join Date: Jun 2010	Titan X50 For Sale...Full or Part Out This is for a pretty new X50...Has only 3 flights on it...sadly though, the 3rd flight, I lost my tail servo control, and it hit the ground during a hover. Every part had been replaced that was damaged except the canopy (Had only scratches) and the Pipe (Has a small dent on the side) The engine is a RL53H with the redline hi-flo pipe that comes with the set. Cyclic servos are DS610's which are still in excellent condition. It has a GY401 and Brand new, never flown S9254 Tail Servo. I also have on there a PushGlo, and a castle BEC for the electronics. Also has an AR8000 for the rX...I might keep that, but depending on the price i can get for it, ill throw it in. This heli is not for me...I am not into the Nitro scene at all...A lot more work then I thought, and my loss will be your gain. The heli is still in excellent condition...Just needs a new home, and someone who will know what the hell they are doing with Nitro. Pics will be added in a little bit. I am not honestly sure what I should make a starting price, so I'll leave it up to ya'll....and please no low ball offers...this is a serious piece of equipment. Also, local pickup preferred, but we can work some sort of CONUS shipping deal with the sale...I am also willing to part out if I have too... Last edited by Trooper11040; 07-04-2011 at 09:58 AM..

07-03-2011, 04:09 PM	#2 (permalink)
Trooper11040 Thread Starter My HF Map location Join Date: Jun 2010	Last edited by Trooper11040; 07-04-2011 at 09:52 AM..

07-18-2011, 09:31 AM	#15 (permalink)
Trooper11040 Thread Starter My HF Map location Join Date: Jun 2010	ttt

08-14-2011, 09:30 AM	#19 (permalink)
jtrides65 Registered Users Join Date: Dec 2010	trade for a pacific knockabout? i got a original knockabout, 8 flights, i flown it once, too big for me, scares me..lol interested? its got the magazine that had the review done on it with it, pics and everything.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-03-2011, 08:49 PM	#3 (permalink)
Trooper11040 Thread Starter My HF Map location Join Date: Jun 2010	Even willing to trade for a Trex 550

07-03-2011, 08:52 PM	#4 (permalink)
MXRACERX43 Registered Users My HF Map location Join Date: Jan 2008	I offered you some help before. Instead of loosing your ass $ on selling, you should make a trip up to our field for some help. There is nothng difficult about nitro. Sure we could get you squared away in an afternoon.

07-03-2011, 09:51 PM	#5 (permalink)
Trooper11040 Thread Starter My HF Map location Join Date: Jun 2010	I'm looking more for a 550 or 500 FBL...I have a trex 600 that I fly...no need for 2 lol

07-03-2011, 11:53 PM	#6 (permalink)
Trooper11040 Thread Starter My HF Map location Join Date: Jun 2010	More pictures as promised:

07-04-2011, 10:54 PM	#7 (permalink)
Trooper11040 Thread Starter My HF Map location Join Date: Jun 2010	Id like to get rid of this soon...All reasonable offers will be accepted!

07-09-2011, 12:44 AM	#8 (permalink)
Trooper11040 Thread Starter My HF Map location Join Date: Jun 2010	Bump...no bites?? Not even to part out?

07-09-2011, 08:13 AM	#9 (permalink)
geomecc Registered Users Join Date: May 2009	500 with out rx and gyro

07-13-2011, 02:14 PM	#10 (permalink)
DG40 Registered Users Join Date: Dec 2010	trades?

07-13-2011, 04:36 PM	#11 (permalink)
Trooper11040 Thread Starter My HF Map location Join Date: Jun 2010	Possibly...pm me

07-14-2011, 11:10 AM	#12 (permalink)
Trooper11040 Thread Starter My HF Map location Join Date: Jun 2010	I guess it's time to part this heli out... GY401 Gyro S9254 Servo 3 DS610's RL53 with stock muffler Airframe

07-14-2011, 12:35 PM	#13 (permalink)
bshinn Registered Users My HF Map location Join Date: Mar 2011	How much for the airframe alone?

07-16-2011, 01:39 PM	#14 (permalink)
Trooper11040 Thread Starter My HF Map location Join Date: Jun 2010	I'm surprised no decent offers on this helicopter! I should have went Align! It would be gone already!! I'll sell it for 800 minus gyro, tail servo and Rx...

07-18-2011, 10:23 AM	#16 (permalink)
Trooper11040 Thread Starter My HF Map location Join Date: Jun 2010	750 no Rx, no tail servo or gyro

07-25-2011, 08:51 PM	#17 (permalink)
Trooper11040 Thread Starter My HF Map location Join Date: Jun 2010	Bump

08-14-2011, 09:17 AM	#18 (permalink)
Trooper11040 Thread Starter My HF Map location Join Date: Jun 2010	Bump...forgot I had this post! I need to get rid of this...need the $$!

08-14-2011, 10:53 PM	#20 (permalink)
Trooper11040 Thread Starter My HF Map location Join Date: Jun 2010	Def looking more for $$ then a trade...I'm trying to pay off the dreaded debt this hobby has put me in...

Register Now

Log-in