Register Now

bigbro3760 · 07-27-2011, 07:11 PM

i understand that 6100t has 3 options for rx. logitech, fytaba, & jr.

i wonder how will i treat my aurora 9?

TYVM

Finless · 07-27-2011, 09:30 PM

I would try Futaba setting. Also way back when I had this gyro I did not find those setting really did anything... At least that is what I recall.

Bob

bigbro3760 · 07-28-2011, 06:37 PM

got it. thanks bob

heliholic123 · 07-31-2011, 02:04 AM

These gyro are very good. I enjoyed mine when I had it.

homestea · 10-08-2011, 09:22 PM

Hello Guys, I have a question about a weird behavior that i am seeing when i set this gyro up. I appologise if somebody has asked this before, but i didnt see anything when I quickly went through the previous 27 pages.

After setting up the gyro per finless's videos, i see that when i move the rudder stick on the controller with the gyro in rate mode (at 50% gain) the servo hits its endpoints way before the sitck is moved full travel. I hit both ends of travel on the rudder servo with about 50% throw of the control stick. Is this correct? At 1% gain in rate mode, behavior is much better and it takes almost full stick deflection to equal full rudder travel. Is this behavior normal? It worrys me because even with 75% exponential at 50% gain in rate mode, it looks like the tail will be way too hard to control since it moves so quickly.

Thanks for your help!

aussiemick · 10-08-2011, 09:24 PM

What you are seeing is absolutely normal for most heading hold gyros.

Are you sure you are not in heading lock mode?
Mick

homestea · 10-08-2011, 10:08 PM

No, I am definatly in rate mode when this is happening. In heading hold mode the servo doesnt center after the stick is centered, but i know this is normal for HH Mode.

just seems weird to me that half of the stick deflection is basically "wasted" in rate mode at 50% gain, but as long as this is normal then its fine with me.

DebianDog · 01-01-2012, 05:39 AM

I forgot how this gyro worked

Glad this was still here.

Oh and Bob do you EVER call a MFer back or what?

Finless · 01-03-2012, 05:29 PM

Quote:

Originally Posted by DebianDog

I forgot how this gyro worked

Glad this was still here.

Oh and Bob do you EVER call a MFer back or what?

Not on New Years Eve or Day! I was not even here until later yesterday....
But I don't call dogs back! I might get bit

Bob

DebianDog · 01-04-2012, 05:22 AM

Quote:

Originally Posted by Finless

But I don't call dogs back! I might get bit

Don't make me come out there.

LND409 · 07-07-2013, 03:57 AM

6 years later this video is still helping people like me out. Thanks

rcjames · 07-07-2013, 04:35 AM

Quote:

Originally Posted by LND409

6 years later this video is still helping people like me out. Thanks

Still great gyro to even be up to keeping up latest 3d ships just where can i get 960us servo darn.

07-27-2011, 09:30 PM	#262 (permalink)
Finless Team Taco VP Thread Starter My HF Map location Join Date: Nov 2005	I would try Futaba setting. Also way back when I had this gyro I did not find those setting really did anything... At least that is what I recall. Bob __________________ "Don't Taco My Pack Dude!" NEW Video Link -> Safety Video #1 Video Link -> CAUTION using powerful tools! Video Link -> How to CRASH TWICE in one flight! Video Link -> Don't Taco!

10-08-2011, 09:24 PM	#266 (permalink)
aussiemick Registered Users My HF Map location Join Date: Jul 2006	What you are seeing is absolutely normal for most heading hold gyros. Are you sure you are not in heading lock mode? Mick __________________

01-01-2012, 05:39 AM	#268 (permalink)
DebianDog Registered Users My HF Map location Join Date: Mar 2005	I forgot how this gyro worked Glad this was still here. Oh and Bob do you EVER call a MFer back or what? __________________ Dan Da Dawg - JR X9303 Hexa F550 on 3S + 6S TREX 500 + 6S TREX 600 + Blade mSR + Blade mCPx2 Brushless + 12S Rave FBL ENV

07-07-2013, 03:57 AM	#271 (permalink)
LND409 Registered Users Join Date: Apr 2013	Logictech 6100T Gyro Setup Videos 6 years later this video is still helping people like me out. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-27-2011, 07:11 PM	#261 (permalink)
bigbro3760 Registered Users Join Date: Jan 2010	i understand that 6100t has 3 options for rx. logitech, fytaba, & jr. i wonder how will i treat my aurora 9? TYVM

07-28-2011, 06:37 PM	#263 (permalink)
bigbro3760 Registered Users Join Date: Jan 2010	got it. thanks bob

07-31-2011, 02:04 AM	#264 (permalink)
heliholic123 Registered Users Join Date: Jul 2011	These gyro are very good. I enjoyed mine when I had it.

10-08-2011, 09:22 PM	#265 (permalink)
homestea Registered Users Join Date: Jul 2011	Hello Guys, I have a question about a weird behavior that i am seeing when i set this gyro up. I appologise if somebody has asked this before, but i didnt see anything when I quickly went through the previous 27 pages. After setting up the gyro per finless's videos, i see that when i move the rudder stick on the controller with the gyro in rate mode (at 50% gain) the servo hits its endpoints way before the sitck is moved full travel. I hit both ends of travel on the rudder servo with about 50% throw of the control stick. Is this correct? At 1% gain in rate mode, behavior is much better and it takes almost full stick deflection to equal full rudder travel. Is this behavior normal? It worrys me because even with 75% exponential at 50% gain in rate mode, it looks like the tail will be way too hard to control since it moves so quickly. Thanks for your help!

10-08-2011, 10:08 PM	#267 (permalink)
homestea Registered Users Join Date: Jul 2011	No, I am definatly in rate mode when this is happening. In heading hold mode the servo doesnt center after the stick is centered, but i know this is normal for HH Mode. just seems weird to me that half of the stick deflection is basically "wasted" in rate mode at 50% gain, but as long as this is normal then its fine with me.

Register Now

Log-in