from spektrum to futaba

[ReadyToCrash]

hi,
i'm moving from spektrum to futaba and i was wondering how to set the gyro gain on a futaba 7c tx.
the manual is quite clear except for those letters A and N that appears to the left of the value.
actually i don't have the radio yet, but was just studying the manual so when i receive it, it will be easier to set it up.
thanks for any help.

[ChrisH]

A = AVCS mode = heading hold

N = Normal mode = rate mode

[Al Miessner]

Originally Posted by ReadyToCrash

hi,
i'm moving from spektrum to futaba and i was wondering how to set the gyro gain on a futaba 7c tx.
the manual is quite clear except for those letters A and N that appears to the left of the value.
actually i don't have the radio yet, but was just studying the manual so when i receive it, it will be easier to set it up.
thanks for any help.

ReadytoCrash.. welcome to the light.. and as mentioned A=heading hold.. N=Normal

[ReadyToCrash]

thanks.
hope i've made the right decision.
i'm having a hard time trying to program futaba 7c.
it's sooooo different from spektrum.
could someone help me?
i have the heli version.
1) in which menu exactly can i assign each switch to the function i want?
2) is there a way to know precisely when the throttle stick is exactly in the middle or i can only guess it?
thanks.

[Mixmaster Pilot]

Sorry I have 8fgs, BUT!!! Make sure you set expo correctly! the setting minus eg. -25 is adding expo! Scared the hell out of me when I set the tail up with +30 expo the first time (lucky I had 0 expo on the cyclic or collective!)

[ReadyToCrash]

Originally Posted by Mixmaster Pilot

Sorry I have 8fgs, BUT!!! Make sure you set expo correctly! the setting minus eg. -25 is adding expo! Scared the hell out of me when I set the tail up with +30 expo the first time (lucky I had 0 expo on the cyclic or collective!)

thank you very much.