Register Now

RichKnapp · 11-06-2013, 05:42 PM

Quote:

Originally Posted by badbandit

The rebuild after my first crash with the 450X. Added some extras and a new canopy - the ESC still needs to be installed.

Sickworm · 11-09-2013, 02:54 AM

I started with a 450 3D, but after a bad crash and collecting parts here and there... I finally finished my new Heli

RichKnapp · 11-09-2013, 10:48 AM

Sweet

ryguy76 · 11-10-2013, 03:49 PM

Quote:

Originally Posted by Sickworm

I started with a 450 3D, but after a bad crash and collecting parts here and there... I finally finished my new Heli

Nice!

I am planning on the same canopy for mine when it arrives. Where did you get the tail fins?

Sickworm · 11-10-2013, 04:01 PM

http://www.fusuno.com/index.php?cPath=931_52_763

this the site

ryguy76 · 11-10-2013, 07:00 PM

Quote:

Originally Posted by Sickworm

http://www.fusuno.com/index.php?cPath=931_52_763

this the site

What about the orange stripe on the fins? Was that something you did on your own? Looks good!

Sickworm · 11-10-2013, 08:06 PM

Those are the stock fins from Blade. I just used some of the sticker sheet, the long skinny one you can get at any hobby store ... cut a 1/4 quarter strip attached it to the fin and cut off the extra

Lu523 · 11-10-2013, 09:10 PM

That is a nice looking bird.

Sickworm · 11-10-2013, 09:36 PM

I took out for the first real flight today.... Its so dialed in, that it will almost Hover by itself handsfree.. The only thing that is not Blade, is the landing gear, Main Blades, and the tail blades.

thank you
tom

ryguy76 · 11-11-2013, 06:58 PM

Quote:

Originally Posted by Sickworm

I took out for the first real flight today.... Its so dialed in, that it will almost Hover by itself handsfree.. The only thing that is not Blade, is the landing gear, Main Blades, and the tail blades.

KiloXray · 11-12-2013, 12:13 AM

My ladies.

Coco66 · 11-12-2013, 01:30 AM

Nice!

How do the Lynx blades you have installed on the 450X fly compared to the Rail 326 (which are amazing, according to me)?

Do I see it correctly? The Revolution are the FB ones?

KiloXray · 11-12-2013, 01:47 AM

Quote:

Originally Posted by Coco66

Nice!

How do the Lynx blades you have installed on the 450X fly compared to the Rail 326 (which are amazing, according to me)?

Do I see it correctly? The Revolution are the FB ones?

Good eye Coco. The Lynx blades installed are the 350mm blades on a stretch, so it really isn't a fair comparison.

The Rails, are really good. I dig flying them. The Revos are indeed the flybar blades. I ordered them on accident, but frankly, I really like them. They have a different feel than the Rails, but it isnt better or worse. It is really a toss up. You should try a set if you like the Rail blades. They are a tad more unstable, but turn and bite a bit harder.

ST1S · 11-12-2013, 09:39 PM

Someone has a bit of a problem there......How many blades does one man need?

R3L72 · 11-13-2013, 01:27 PM

Quote:

Originally Posted by ST1S

Someone has a bit of a problem there......How many blades does one man need?

I'm just as bad as KiloXray, lol. The only way I'll personally know which main blades are going to feel right on the Helis I have is to try them all

Sickworm · 11-14-2013, 10:43 PM

I am selling my brand new DX7s. I got it about 2 months ago. Used it around 6 times. Has the box and everything inside that came in it just like when I bought from the store.

You would never know that I used it by looking at. I am selling it because I bought a DX9

Have picture if you want to see them

KiloXray · 11-14-2013, 10:44 PM

Quote:

Originally Posted by Sickworm

I am selling my brand new DX7s. I got it about 2 months ago. Used it around 6 times. Has the box and everything inside that came in it just like when I bought from the store.

You would never know that I used it by looking at. I am selling it because I bought a DX9

Have picture if you want to see them

Totally wrong forum dude.

Sickworm · 11-14-2013, 10:46 PM

I figured that someone might be interested and save them the time of looking since I have posted in here before.

But thanks for bring that to my attention

kb1846 · 11-16-2013, 01:15 AM

My complete refit ...
Had a minor rotor strike landing, created the usual negative vibes, decided this is time to migrate to a new frame, therefore spend an extra penny or two on Spektrum H3020 cyclics, MKS DS95-i tail servo, Lynx fibreglass canopy, and to renew a few of the stock parts without going berserk on metal. Tried to emulate H20Rower's wiring, not quite but pretty good. Bit of credit built up with A Main meantime, shortly to translate into some Revolution main and tail rotors ...

renefigueroa · 11-16-2013, 05:03 AM

Very nice

11-09-2013, 02:54 AM	#1062 (permalink)
Sickworm Registered Users Join Date: Nov 2012	450 3D to 450X I started with a 450 3D, but after a bad crash and collecting parts here and there... I finally finished my new Heli Attached Thumbnails

11-10-2013, 08:06 PM	#1067 (permalink)
Sickworm Registered Users Join Date: Nov 2012	Strip Those are the stock fins from Blade. I just used some of the sticker sheet, the long skinny one you can get at any hobby store ... cut a 1/4 quarter strip attached it to the fin and cut off the extra

11-10-2013, 09:36 PM	#1069 (permalink)
Sickworm Registered Users Join Date: Nov 2012	thanks I took out for the first real flight today.... Its so dialed in, that it will almost Hover by itself handsfree.. The only thing that is not Blade, is the landing gear, Main Blades, and the tail blades. thank you tom

11-12-2013, 12:13 AM	#1071 (permalink)
KiloXray The Airetic Join Date: Nov 2012	My ladies. __________________ Free Agent....With standalone opinions.

11-12-2013, 01:30 AM	#1072 (permalink)
Coco66 Registered Users Join Date: Apr 2012	Nice! How do the Lynx blades you have installed on the 450X fly compared to the Rail 326 (which are amazing, according to me)? Do I see it correctly? The Revolution are the FB ones? __________________ Oxy 2 ♦ X-Vert ♦ Warp 360 ♦ Blade 450X ♦ Blade 450X Nightflyer ♦ Goblin 500 ♦ 2 X mCPX v2 ♦ night fly mQX ♦ LadyMQX ♦ nano QX ♦ nano QX FPV ♦ Inductrix ♦ DX8 G1

11-09-2013, 10:48 AM	#1063 (permalink)
RichKnapp Registered Users My HF Map location Join Date: Dec 2012	Sweet

11-10-2013, 04:01 PM	#1065 (permalink)
Sickworm Registered Users Join Date: Nov 2012	http://www.fusuno.com/index.php?cPath=931_52_763 this the site

11-10-2013, 09:10 PM	#1068 (permalink)
Lu523 Registered Users My HF Map location Join Date: Sep 2012	That is a nice looking bird.

11-12-2013, 09:39 PM	#1074 (permalink)
ST1S Registered Users Join Date: Sep 2013	Blade fettish Someone has a bit of a problem there......How many blades does one man need? __________________ ST1S...coming at you from the middle of nowhere. Blade 450X, MCPX V2 X2, MSR, MSRX Parkzone Planks: P-51, P-47, Spitfire, UMX P-40, Beast Traxxas Slash, RC4WD TF-2, DX8

11-14-2013, 10:43 PM	#1076 (permalink)
Sickworm Registered Users Join Date: Nov 2012	DX7s $200 I am selling my brand new DX7s. I got it about 2 months ago. Used it around 6 times. Has the box and everything inside that came in it just like when I bought from the store. You would never know that I used it by looking at. I am selling it because I bought a DX9 Have picture if you want to see them

11-14-2013, 10:46 PM	#1078 (permalink)
Sickworm Registered Users Join Date: Nov 2012	No worries I figured that someone might be interested and save them the time of looking since I have posted in here before. But thanks for bring that to my attention

11-16-2013, 01:15 AM	#1079 (permalink)
kb1846 Join Date: Dec 2012	My complete refit ... Had a minor rotor strike landing, created the usual negative vibes, decided this is time to migrate to a new frame, therefore spend an extra penny or two on Spektrum H3020 cyclics, MKS DS95-i tail servo, Lynx fibreglass canopy, and to renew a few of the stock parts without going berserk on metal. Tried to emulate H20Rower's wiring, not quite but pretty good. Bit of credit built up with A Main meantime, shortly to translate into some Revolution main and tail rotors ... Attached Thumbnails

11-16-2013, 05:03 AM	#1080 (permalink)
renefigueroa Registered Users Join Date: May 2012	Very nice

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in