Super CP reach rotor head max speed at ~40% throttle? - HeliFreak
Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Walkera Helicopters > Mini CP


Mini CP Walkera Mini CP Helicopter Support


Reply
 
LinkBack Thread Tools Display Modes
Old 08-22-2013, 09:46 AM   #1 (permalink)
Registered Users
 

Join Date: Jan 2011
Location: on Earth (the small planet at the bottom right)
Default Super CP reach rotor head max speed at ~40% throttle?

Hi,
I've made a strange discover on my SuperCP.... the max rotor head speed (RPM) is reached with ~40% of throttle channel? The rpm did'nt increase with higher throttle channel value (from 40 to 100%)?
I would like to know if this is the same on yours (or on your Genius or miniCP)?
Thanks.
Note: measure was made with a flat pitch curve set to 0.
domcars0 is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 08-24-2013, 09:43 PM   #2 (permalink)
Registered Users
 

Join Date: May 2013
Location: United States
Default

Hmm... I don't have anything to measure my rpms, but this does sound very strange. Wen I raise the throttle on my mini though, I definitely hear the motor getting louder... Which would lead me to believe that my rpms do raise. Maybe check you travel adjust on throttle or somethng like that.
MiniCPflyer0110 is offline        Reply With Quote Quick reply to this message
Old 08-25-2013, 10:08 AM   #3 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Jan 2011
Location: on Earth (the small planet at the bottom right)
Default

Hi MiniCPflyer0110,
Thanks for your reply. I use deViation firmware and the throttle travel adj. is OK (also my FMODE0 TH curve which is a 1-1 curve)... I've had a look on my output channel monitor
and everything seems OK also (output channel value varies well from -100 to +100%)...
May be this thing does not exists on the miniCP just on the SuperCP (like the TC delay issue which exists on SuperCP and on MasterCP)?
domcars0 is offline        Reply With Quote Quick reply to this message
Old 09-18-2013, 02:46 PM   #4 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Jan 2011
Location: on Earth (the small planet at the bottom right)
Default

I just have bought a mini CP and I'm sure now that the Super CP max throttle is restrained (like the cyclic servos travel). And that's why Walkera says that the superCP is for beginner.
domcars0 is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
 

SEO by vBSEO 3.6.1