Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > Multi Rotor Support > Flight Controllers (NAZA, Wookong, A2, etc...)


Flight Controllers (NAZA, Wookong, A2, etc...) Flight Controllers (NAZA, Wookong, A2, etc...)


Reply
 
LinkBack Thread Tools Display Modes
Old 05-05-2012, 04:33 AM   #1 (permalink)
Registered Users
 

Join Date: May 2012
Default F550 with WKM ... No spin motors

Hello to all,
My name Antonis from Athens /Greece ,
Build a 550 with WKM ... Step by step install the program DJI WKM all ok ...
Now I have a problem, after from install the program and fix all parameter for my f550 (x/z for gps /calibrator tx / failure safe mode gps ...) don't spin the motors !!!!
I saw many others parameters from my tx (futaba 10CG ) and from my F550/ WKM / and program .
I Test esc's alone with motors and it is ok ...!!! I put Esc (without D Bus) on receiver and all Esc and motors
After all the above I understand that the D Bus *not send commands to the receiver ...
Is there a secret, any tips, something that did not, beyond the manioual and program?
Thanks
Good wishes To all.

Antonis
Antwnis is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 05-06-2012, 07:07 AM   #2 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: May 2012
Default

Any answer ?
Antwnis is offline        Reply With Quote Quick reply to this message
Old 05-10-2012, 01:31 AM   #3 (permalink)
Registered Users
 
Posts: 2,864
 
My HF Map location
Join Date: Jun 2007
Default

Just build my 550 with Futaba (but with SBus Receiver) and worked right away... did you do the both sticks into a corner action to arm your WKM?
I found this video really helpful:
[ame]http://vimeo.com/40348937[/ame]

-Klaus
__________________
SuziLAOS-DNHP-CenturioMax-Protos500-Logo400-500-600SE
worldofmaya is offline        Reply With Quote Quick reply to this message
Old 05-10-2012, 04:17 AM   #4 (permalink)
Registered Users
 
Posts: 3,270
 

Join Date: Sep 2011
Default

You may have to adjust your throttle trim down a bit to get it to recognise low throttle for arming.
__________________
similis vobis fugere eam furatus
"The beatings will continue until morale improves."
-- William Bligh
petedee is offline        Reply With Quote Quick reply to this message
Old 05-11-2012, 08:14 AM   #5 (permalink)
Registered Users
 
Posts: 91
 

Join Date: Jan 2009
Default

"... did you do the both sticks into a corner action to arm your WKM?"

I did that yesterday

After flying my helis and planes I took the quad out AND COULDN"T GET IT STARTED.

I was so mad, I went home.

Then I realize what I'd done (or not done) DUH!
__________________
Weeeeeeeeeee!
Kamikaze Pilot is offline        Reply With Quote Quick reply to this message
Old 05-11-2012, 08:58 PM   #6 (permalink)
Registered Users
 
Posts: 3,270
 

Join Date: Sep 2011
Default

Any luck with this yet Antonis?
__________________
similis vobis fugere eam furatus
"The beatings will continue until morale improves."
-- William Bligh
petedee is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1