List of issues since binding to a DX7

[JohnDoe.]

1. I can get the throttle hold to function but once I activated it I can't get it to deactivate.

2. When I got to Idle up one the pitch curve mirrors the throttle curve I.e 100/100/80/100/100
So I get no negative pitch.

3. Idle up is on the gear switch.

4 Heli just goes into safe mode now for no damn reason just falls out of the sky (Upright) and starts blinking. Never happened with the DX4.


Pleas help I am trying to give this heli a fair shake. So I want to say it's me not getting it rather than it's a crappy product.

[Holst]

I have a dx7 and I have no problems.
do you have the swash mix angle set correctly?
go through all the settings in the manual and check them all.
also rebind making sure you follow the instructions, v1 and v2 differ slightly.

if you use the recommended settings the heli should work fine.

[N4HHA]

+1 with my V1 and DX7. "It's gold, Jerry, gold!"

[JohnDoe.]

Originally Posted by Holst

I have a dx7 and I have no problems.
do you have the swash mix angle set correctly?
go through all the settings in the manual and check them all.
also rebind making sure you follow the instructions, v1 and v2 differ slightly.

if you use the recommended settings the heli should work fine.

I will check if its a V2 manual as it is a manual I got from online. As fars as the swash I believe it is set up correctly as it flies in Normal mode.

[JohnDoe.]

Okay I think I have it figured thanks guys

[Ampdraw]

Please post your findings when you sort it. May help someone else.
...for info's sake here is your other thread.
https://www.helifreak.com/showthread.php?t=414452

Amp