Tail Servo Mechanics - HeliFreak
Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Blade Helicopters (eFlite) > 130X


130X Blade 130X Helicopters Information and Help


Reply
 
LinkBack Thread Tools Display Modes
Old 07-20-2012, 09:07 PM   #1 (permalink)
Registered Users
 
Posts: 324
 
My HF Map location
Join Date: Dec 2006
Location: Jasper Texas
Question Tail Servo Mechanics

Are the replacement servo mechanics available yet for the tail servo mine got hot and melted and deformed big time....Wonder what the difference in the cyclic and tail servos are??? Any ideas?
CAMOMAN is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 07-20-2012, 09:12 PM   #2 (permalink)
Registered Users
 

Join Date: May 2009
Location: Haralson County GA USA
Default

Quote:
Wonder what the difference in the cyclic and tail servos are??? Any ideas?
If you look at the PCB it is clear that the Tail servo's board has small mounting ears and if you look at the grears they are different also.

I have read a few reports now of the tail servo overheating severly. Wonder what is the root cause of this. I do not have the ability to fly mine hard enought to even get it warm much less hot.
everydayflyer is offline        Reply With Quote Quick reply to this message
Old 07-20-2012, 09:17 PM   #3 (permalink)
Registered Users
 
Posts: 939
 

Join Date: Jun 2009
Location: Shelby Township, Michigan
Default

Call HH and get a replacement servo.
Drivinfast247 is offline        Reply With Quote Quick reply to this message
Old 07-20-2012, 09:20 PM   #4 (permalink)
Registered Users
 
Posts: 324
Thread Starter Thread Starter
 
My HF Map location
Join Date: Dec 2006
Location: Jasper Texas
Unhappy

Yea I called already and they are back order at this time dangit
CAMOMAN is offline        Reply With Quote Quick reply to this message
Old 07-21-2012, 01:16 AM   #5 (permalink)
Registered Users
 
Posts: 7,689
 
My HF Map location
Join Date: Sep 2011
Location: Vancouver Canada
Default

Tail servo runs a bigger motor (6mm) and taller gearing (for fast action). I wonder if the mCPx 6mm 1S tail motor will work. 130X servo also runs at 1S voltage.
DoubleCH is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1