ESC sync/tuning - HeliFreak
Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Gaui Helicopters > 330X


330X Discussion and support of the Gaui Hurricane 330X QuadCopter


Reply
 
LinkBack Thread Tools Display Modes
Old 09-22-2012, 10:34 AM   #1 (permalink)
Registered Users
 
Posts: 204
 

Join Date: Aug 2010
Location: California
Default ESC sync/tuning

The controller (GU344) has never seemed to work right, as far as the gyro/heading hold feature. Could this have something to do with the problem below???

The ESC for motor #1 burned out, and I replaced it with the stock ESC. When I began the ESC tuning/sync for all motors the ESC I replaced beeps before the other three. I waited for the cycle to finish, unplugged the bat, restarted everything.

When the motors/ESC begin the start-up phase motor #1 still starts beeping first and the other three together as they should. I have done this numerous times, I even tried each one individually, and still the same problem. Motor #1 always starts beeping first and the other three start up together as they should. Since #1 doesn't start right, the quad wants to flip-over to the left.

I'm at a loss....
Brian4301 is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 10-08-2012, 11:06 AM   #2 (permalink)
Registered Users
 
Posts: 204
Thread Starter Thread Starter
 

Join Date: Aug 2010
Location: California
Default

Little update on this problem.

I contacted a Guai rep and after going through the set up with him it was determined when the #4 ESC burned out it may have fried the controller as well. Which would explain the reason #4 would never sync with the other three.

I was going to get the stock controller again but after checking around and reading a lot of complaint post, I decided to get the FY 901 (newer model then 90Q) since it also has self leveling.

I suppose the votes against this one were about the same as the stock but considering how poor the performance was with the stock this might be OK.

I'll post my "opinion" after it arrives and I get it installed.
Brian4301 is offline        Reply With Quote Quick reply to this message
Old 10-18-2012, 09:01 PM   #3 (permalink)
Registered Users
 
Posts: 134
 

Join Date: Nov 2011
Location: Ajax, Ontario, Canada
Default

Brian, if you don't like it drop me a line as I have 2 GU-344's working fine but have gone Naza for my needs and I will let them go pretty cheap.

Dave
Birdman4498 is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Insurance
Please select your insurance company (Optional)
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © VerticalScope Inc. All rights reserved.
 

SEO by vBSEO 3.6.1