Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > SAB Goblin 630/700/770


SAB Goblin 630/700/770 SAB Heli Division 630/700/770 - Goblin Helicopters Factory Support


Reply
 
LinkBack Thread Tools Display Modes
Old 01-19-2013, 07:05 PM   #1 (permalink)
Registered Users
 
Posts: 2,646
 

Join Date: Mar 2008
Default 770 kit

Got my 770 kit a couple of days ago and just got round to checking out the parts quality etc, have a slightly notchy main blade grip but as I will be stripping it all down anyway to see if it' been assembled correctly ( boy are those bolts in tight, probably lock tite in the bearing )
I will find out the problem, just a bit unhappy that a heli this expensive should have dodgy bits the tail assembly is a jewel though.
Anyway, bench now cleared for the build.
Towel balled up and in the canopy and warmed with a hair dryer to ease it appart a tad.
Paintwork on canopy and boom nice enough.
__________________
Regards.
Ian

Henseleit TDR, Minicopter. Mikado. Jeti Carbon Red DS16. Plus scale stuff
satsuma is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 01-19-2013, 07:48 PM   #2 (permalink)
Registered Users
 
Posts: 43,767
 
My HF Map location
Join Date: May 2008
Default

Congrats.. is this your first Goblin? If it is be, sure to use aramb's build thread.. it was so helpful for me.

https://www.helifreak.com/showthread.php?t=483451
__________________
"It's not just a hobby... it's a lifestyle" - Pete ϟ MINNESOTA!
Goblin 500 + 700 / SK540 / Jives / DX8 / Quantum / RJX servos / 306b / Deep cycles
Slyster is offline        Reply With Quote Quick reply to this message
Old 01-19-2013, 08:18 PM   #3 (permalink)
Registered Users
 
Posts: 2,646
Thread Starter Thread Starter
 

Join Date: Mar 2008
Default

Thanks, yep, first Goblin but not first 700/800 size heli, just love the look and had to have one
__________________
Regards.
Ian

Henseleit TDR, Minicopter. Mikado. Jeti Carbon Red DS16. Plus scale stuff
satsuma is offline        Reply With Quote Quick reply to this message
Old 01-21-2013, 06:12 AM   #4 (permalink)
Registered Users
 
Posts: 2,646
Thread Starter Thread Starter
 

Join Date: Mar 2008
Default

Stripped the head, roughness was due to too much locktite and some had got into the bearings,.cleaned and relubed and all is good.
__________________
Regards.
Ian

Henseleit TDR, Minicopter. Mikado. Jeti Carbon Red DS16. Plus scale stuff
satsuma is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1