Stagility, it's a new flight mode - For dx6i radios and up!

[RZR007]

Outstanding job!
The video is hard to see at the settings part. Would you be willing to share your dx9 file you made for this?

[mdt2]

Great work - any chance you can share your DX9 spm file?

[bnexpress]

Way to coooool Thanks for the info!!!! Can hardly wait Going to get in my TX and give it a go.

[Quadflyer]

Will this work with the DX6i?

[indoorheli]

I just posted the info on settings in the first post. Though I will post a SPM file today after I clean up all non-relevant mixes. It is actually funny for how easy of a mix it is, how many variations I tried

Originally Posted by Quadflyer

Will this work with the DX6i?

I dont think the dx6i has curve mixing, so It will not work.

[ecard]

My DX7s does not have curve mixing

Now I want to upgrade my controller

I hate you!!!

[RZR007]

Lol that's funny, he's giving people a reason to upgrade their radio!

[ronj]

What a great idea. Once the weather is better I will have to try that on my DX8, but a DX9 looks nice.

Can we STICKY this?

[FoosYou]

Originally Posted by ecard

My DX7s does not have curve mixing



Now I want to upgrade my controller



I hate you!!!

Uggghh now I'm sad.

[[email protected]]

Originally Posted by indoorheli

Shane got a vid via skype earlier today, no video online yet.

Sorry, guys I am at the park testing lower rates aka 100% rates to makes sure it works as it did at max ( i fly at EPA150% and rates at 125% =max possible)

[email protected] - no it does not take an extreme movement, it is very quick and close to center

Awesome thinking Indoorheli! So my guess was quite close, right? You are using a mix on the ail/elev to be in stability mode around center stick and agility mode outside center stick, right?

[bw762qx]

I just got my dx6i noooooooo

[ecard]

Originally Posted by indoorheli

Shane got a vid via skype earlier today, no video online yet.

Sorry, guys I am at the park testing lower rates aka 100% rates to makes sure it works as it did at max ( i fly at EPA150% and rates at 125% =max possible)

[email protected] - no it does not take an extreme movement, it is very quick and close to center

Because I hate you, I got my hand on a DX9 to test

When I go into Mixing, 4 to 7 have dashes... I cannot change them, how to fix this?

[indoorheli]

Originally Posted by ecard

My DX7s does not have curve mixing

Now I want to upgrade my controller

I hate you!!!

Does it have a 3 point mix? If it does it wont be ask quick to go to agility but it will work.

Originally Posted by RZR007

Lol that's funny, he's giving people a reason to upgrade their radio!

Its a grass roots tactic

Originally Posted by FoosYou

Uggghh now I'm sad.

Sorry, I thought all radios had basic curves

Originally Posted by [email protected]

Awesome thinking Indoorheli! So my guess was quite close, right? You are using a mix on the ail/elev to be in stability mode around center stick and agility mode outside center stick, right?

You were right on with the mixing, just using curves makes it able to have a steep drop from point 4 to point 3 or 5. If you check out the first post vid, there is a flight demo and a demo of how fast the stick responds when i got back to my shop.

[indoorheli]

Originally Posted by ecard

Because I hate you, I got my hand on a DX9 to test

When I go into Mixing, 4 to 7 have dashes... I cannot change them, how to fix this?

Depending on what you are mixing you give directional input. For elevator to gear you give elevator input and it will say "add curve" at the bottom of the screen. When that pops up use the roller to go down and select it. It will clone whatever the last percentage is of the last point.

[RZR007]

Originally Posted by ronj

What a great idea. Once the weather is better I will have to try that on my DX8, but a DX9 looks nice.

Can we STICKY this?

I agree, it should be a sticky.... Especially when he provides the dx9 file for it.

[ecard]

Originally Posted by indoorheli

Depending on what you are mixing you give directional input. For elevator to gear you give elevator input and it will say "add curve" at the bottom of the screen. When that pops up use the roller to go down and select it. It will clone whatever the last percentage is of the last point.

That worked Do you have any Dual Rate for switch H?

It does not want to rest when in the middle, it stays in agility mode

[ecard]

Originally Posted by ecard

That worked Do you have any Dual Rate for switch H?

It does not want to rest when in the middle, it stays in agility mode

Problem fixed.... The 0 curve point was set wrong Now it works perfectly in my basement... But it's -30 C (-22 F) !!!

You made me buy a new DX9

[indoorheli]

Originally Posted by ecard

That worked Do you have any Dual Rate for switch H?

It does not want to rest when in the middle, it stays in agility mode

Not for my setup as i fly at a minimum of 100% rates, but if you use lower rates you can tie higher rates to that switch as well

snip-

[indoorheli]

Originally Posted by ecard

Problem fixed.... The 0 curve point was set wrong Now it works perfectly in my basement... But it's -30 C (-22 F) !!!

You made me buy a new DX9

Glad you got it figured out.

The dx9 is an amazing radio, voice, wtr, assignable switch and channels, sequencer, curves, pre-flight check, better gimbals, model utilities, system menu access, more models and then even more stuff.

BTW If you set different rates, remember that the dx9 has rates call out so you can tell if you just gave low,mid or high rates with a specific switch.

[ecard]

Originally Posted by indoorheli

Glad you got it figured out.

The dx9 is an amazing radio, voice, wtr, assignable switch and channels, sequencer, curves, pre-flight check, better gimbals, model utilities, system menu access, more models and then even more stuff.

BTW If you set different rates, remember that the dx9 has rates call out so you can tell if you just gave low,mid or high rates with a specific switch.

All nice features I was also able to implement into my nano QX and 180 QX settings