Register Now

ben_beyer · 12-01-2015, 08:53 PM

Quote:

Originally Posted by Puttputt maru

Please let's not start this again "bluelevel" or what ever your new avatar is now. This was discussed at length on an other forum (RCGroup) and went on forever in june of 2014, I believe.

As I recalled only two event like this happened one in Europe and one in the States.

Are you looking for an other fight with Jeti and ZB? (Just a rethorical question, no need to answer)

My apologies, I didn't mean to dig up a past topic.

I am from Texas and currently looking to purchase a Jeti coming from a Futaba 14SG. You can check out the RCHN forum for my questions. You can also find me on RCG (ben_beyer) and giantscalenews.com (Notorious B.E.N.).

Thunder Fighter · 12-01-2015, 09:39 PM

If I remember correctly this issue was linked to the radio not being transported correctly, with a piece of the packing in the case not being used after initial delivery. Not sure if this was the explanation for both incidences but rest assured it is not a common issue.

//Dennis.

ben_beyer · 12-01-2015, 10:40 PM

Thanks!

That's the first time I've ever seen a broken stick.

Puttputt maru · 12-02-2015, 05:00 AM

Quote:

Originally Posted by ben_beyer

My apologies, I didn't mean to dig up a past topic.

I am from Texas and currently looking to purchase a Jeti coming from a Futaba 14SG. You can check out the RCHN forum for my questions. You can also find me on RCG (ben_beyer) and giantscalenews.com (Notorious B.E.N.).

No problem. The way you brought it up it seemed like it was your plane hence my connection.

Quote:

f I remember correctly this issue was linked to the radio not being transported correctly, with a piece of the packing in the case not being used after initial delivery. Not sure if this was the explanation for both incidences but rest assured it is not a common issue.

Yes that was the issue. Use the casing and protecting foam which is part of the lid for the case of the DS but is free floating in case of the DC.

ben_beyer · 12-02-2015, 06:42 AM

No worries. If the guy keeps coming back with different names, you had a reason to be suspicious.

Puttputt maru · 12-02-2015, 07:13 AM

By the way I come from a long line of JR radio and I never regretted my switch, since 2 years now, to Jeti.

Coming from an equally good company as JR with Futaba, I think you will not regret going to Jeti either.

aziz76 · 12-02-2015, 09:02 AM

Same here, switch from a Futaba 18MZ 2 years ago and never looked back. Recently sold the 18MZ too.

ben_beyer · 12-02-2015, 12:48 PM

Yeah, I'm thinking I'm going to make the switch but I will probably wait for the DS-24 to come out.

I may still just get a DS-14 though. Sometimes it's easier to keep things a little simpler.

UCPharmD · 12-02-2015, 01:32 PM

Quote:

Originally Posted by ben_beyer

Yeah, I'm thinking I'm going to make the switch but I will probably wait for the DS-24 to come out.

I may still just get a DS-14 though. Sometimes it's easier to keep things a little simpler.

It's plenty of radio.

mkovalcson · 12-04-2015, 10:38 AM

That brings my fleet up to 4 again. A TDR-2 is coming in a couple months.

TeroS · 12-06-2015, 08:43 AM

Puttputt maru · 12-13-2015, 07:49 AM

I just love the look of the logo. Got to get me one

UCPharmD · 12-16-2015, 06:04 PM

Right after I got it set up for the first time.

UCPharmD · 12-20-2015, 08:52 PM

deleted

popokatepetl · 01-05-2016, 03:59 AM

Here are my two Goblins on JETI

markrj · 01-08-2016, 11:23 PM

My Oxy3 Stretch ready for maiden...

markrj · 01-25-2016, 11:07 PM

And, the entire Jeti fleet...

The Oxy3 Stretch had an awesome maiden flight today. MUI50/R3/Vortex VX1n.

ragtop01 · 01-27-2016, 06:46 PM

gunny_jeeves · 02-08-2016, 08:19 PM

I can't wait to post a V911 here.... Lol!

How cool is that for a first Jeti controlled model?

Raleighcopter · 02-08-2016, 08:38 PM

Damn you. You beat me here.

V911 on a jeti ds14. (0 min 19 sec)

Done with this blasphemy...

Oops, not that blasphemy, this one....

12-01-2015, 09:39 PM	#42 (permalink)
Thunder Fighter Registered Users Join Date: Jul 2007 Location: Melb, Oz	If I remember correctly this issue was linked to the radio not being transported correctly, with a piece of the packing in the case not being used after initial delivery. Not sure if this was the explanation for both incidences but rest assured it is not a common issue. //Dennis. __________________ soXos Strike7 : soXos 600 : soXos 550 : soXos F3C 800 Protos 380 : soXos DB7 nightflyer : Jeti DS-16 & DS-12 : Mini Protos FBL Stretch : Logo 600 I am www.soxosaustralia.com.au \| VTX blades \| 1st-RC Products \| EGODRIFT motors

12-02-2015, 07:13 AM	#46 (permalink)
Puttputt maru Registered Users Join Date: May 2009	By the way I come from a long line of JR radio and I never regretted my switch, since 2 years now, to Jeti. Coming from an equally good company as JR with Futaba, I think you will not regret going to Jeti either. __________________ TDSF, TDR-II, Triabolo, 2 X TDR, Logo 700,Protos evoluzione, T-Rex 700Dominator, Drake & Raw, SpiritRS, Jeti DC-24,HW,Kosmik,Jive Pro EF MXS 3W110, Ultimate Aeroworks 20-300, DA 170, PowerBox Mercury, Q80-8M in a 91" EF Extra and MXS 104+ few jets

12-02-2015, 09:02 AM	#47 (permalink)
aziz76 Registered Users My HF Map location Join Date: Dec 2011	Same here, switch from a Futaba 18MZ 2 years ago and never looked back. Recently sold the 18MZ too. __________________ *A\ziz - Citizen 672* Minicopter Diabolo 700 Black, SAB Kraken 700, Kraken 580, Minicopter Diabolo 600, Minicopter Diabolo 550, Henseleit TDR Mark II, Henseleit TDR Jeti DS24 / VControl Touch

12-04-2015, 10:38 AM	#50 (permalink)
mkovalcson Registered Users Join Date: Apr 2011 Location: None-ya, but it's no secret	That brings my fleet up to 4 again. A TDR-2 is coming in a couple months. __________________ Mark

12-06-2015, 08:43 AM	#51 (permalink)
TeroS Registered Users Join Date: Mar 2013	__________________ RC-Thoughts.com - TeroS formerly known as CP-Geek

12-01-2015, 10:40 PM	#43 (permalink)
ben_beyer Registered Users Join Date: Sep 2008	Thanks! That's the first time I've ever seen a broken stick.

12-02-2015, 06:42 AM	#45 (permalink)
ben_beyer Registered Users Join Date: Sep 2008	No worries. If the guy keeps coming back with different names, you had a reason to be suspicious.

12-02-2015, 12:48 PM	#48 (permalink)
ben_beyer Registered Users Join Date: Sep 2008	Yeah, I'm thinking I'm going to make the switch but I will probably wait for the DS-24 to come out. I may still just get a DS-14 though. Sometimes it's easier to keep things a little simpler.

12-13-2015, 07:49 AM	#52 (permalink)
Puttputt maru Registered Users Join Date: May 2009	I just love the look of the logo. Got to get me one __________________ TDSF, TDR-II, Triabolo, 2 X TDR, Logo 700,Protos evoluzione, T-Rex 700Dominator, Drake & Raw, SpiritRS, Jeti DC-24,HW,Kosmik,Jive Pro EF MXS 3W110, Ultimate Aeroworks 20-300, DA 170, PowerBox Mercury, Q80-8M in a 91" EF Extra and MXS 104+ few jets

12-16-2015, 06:04 PM	#53 (permalink)
UCPharmD Registered Users Join Date: Sep 2014	Right after I got it set up for the first time. Attached Thumbnails __________________ Goblin 380 / 500 / 700C / 700KSE / ZMR250/ QAV180/ VAS Banshee/ VAS Wraith Micro/ MSH Brain FBLs/ HW ESCs/ XNOVA Motors/ Jeti DS-14

12-20-2015, 08:52 PM	#54 (permalink)
UCPharmD Registered Users Join Date: Sep 2014	My entire fleet deleted

01-05-2016, 03:59 AM	#55 (permalink)
popokatepetl BD Forum Support Join Date: Oct 2008	Here are my two Goblins on JETI Attached Thumbnails

01-08-2016, 11:23 PM	#56 (permalink)
markrj Registered Users My HF Map location Join Date: Dec 2012	My Oxy3 Stretch ready for maiden... Attached Thumbnails

01-25-2016, 11:07 PM	#57 (permalink)
markrj Registered Users My HF Map location Join Date: Dec 2012	And, the entire Jeti fleet... The Oxy3 Stretch had an awesome maiden flight today. MUI50/R3/Vortex VX1n. Attached Thumbnails

01-27-2016, 06:46 PM	#58 (permalink)
ragtop01 Registered Users My HF Map location Join Date: Dec 2009	__________________ "just let it happen"

02-08-2016, 08:19 PM	#59 (permalink)
gunny_jeeves Registered Users Join Date: Mar 2013	I can't wait to post a V911 here.... Lol! How cool is that for a first Jeti controlled model?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in