Register Now

Matty6901 · 07-20-2014, 10:57 AM

I have a Bavarian Demon that I would like to setup in the following fashion. On the 3 position switch I would like position 1 stabilization off, position 2 at 17%, and position 3 at 35%. Then I need another switch to override the 3 position switch when I press it for the bail out function. I think I need to use a C-Mix with a slave and master function.

TMoore · 07-28-2014, 11:52 PM

No c-mix is required. You can do everything you need by using the logical switches and EPA settings.

07-20-2014, 10:57 AM	#1 (permalink)
Matty6901 Registered Users Join Date: Jul 2009	c-mix and 3 position switch I have a Bavarian Demon that I would like to setup in the following fashion. On the 3 position switch I would like position 1 stabilization off, position 2 at 17%, and position 3 at 35%. Then I need another switch to override the 3 position switch when I press it for the bail out function. I think I need to use a C-Mix with a slave and master function. Last edited by Matty6901; 07-20-2014 at 02:00 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-28-2014, 11:52 PM	#2 (permalink)
TMoore Registered Users Join Date: Apr 2004	No c-mix is required. You can do everything you need by using the logical switches and EPA settings.

Register Now

Log-in