FPV gimbal from banggood

[mhills51]

This unit is under $60 so don't think it comes out of the box perfect. It does seem to perform just as well as the over $100 units.

First off, it seems at some point they changed motors and didn't change the motor mounts. You will see the motor and mount not flush. This is a easy fix. Just take the bracket off and use a dremel around the middle screw mount. This needs to be done on both mounts. Second everything needs to be loctited.

It uses the BGC2.2 board and software so you can download the programming software and make any changes you need.

http://www.banggood.com/FPV-2-Axis-B...-p-908068.html

Multicopter Testing SJ5000 camera. (2 min 2 sec)

[seabasshwd]

Thanks. Just ordered one