Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > Multi Rotor Support > Open Source Flight Controllers (CC3D, Ardupilot, etc.)


Open Source Flight Controllers (CC3D, Ardupilot, etc.) Open Source Flight Controllers (CC3D, Ardupilot, etc.)


Reply
 
LinkBack Thread Tools Display Modes
Old 07-28-2015, 02:16 PM   #1 (permalink)
Registered Users
 
My HF Map location
Join Date: May 2008
Default 250 quad and CC3D

After completing the programming of the cc3d. I connected the battery and placed the quad on the floor to make a test spin up. After arming I pushed the throttle forward and got nothing then connected it to the pc and every thing had changed. No 3 position modes or my channel 5 switch either. It had also went back to "Always disarm" This little cc3d is bad screwy if I have to reprogram this thing before each flight to heck it that carp. Right now the 3 positions modes are disabled and I can't remember what channels they were before this happened.
WyDiablo is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 07-29-2015, 01:16 AM   #2 (permalink)
Registered Users
 
Posts: 2,001
 
My HF Map location
Join Date: Feb 2012
Default

Quote:
Originally Posted by WyDiablo View Post
After completing the programming of the cc3d. I connected the battery and placed the quad on the floor to make a test spin up. After arming I pushed the throttle forward and got nothing then connected it to the pc and every thing had changed. No 3 position modes or my channel 5 switch either. It had also went back to "Always disarm" This little cc3d is bad screwy if I have to reprogram this thing before each flight to heck it that carp. Right now the 3 positions modes are disabled and I can't remember what channels they were before this happened.
I have no idea what happened but I think you should just start again... erase and upgrade etc

Just remember to keep pressing the save button.

Also you can export your config so you can just import it next time you need to.
Click File -->Export UAV Settings

Mine have been ok at saving data but I have seen a cc3d forget the flight modes etc a couple of times.

If it keeps doing that I would just get a new one... even the cheap clones are usually ok
__________________
Geoff
Align trex based 450 dfc (6s) x 2 - 300x - mcpxbl - Aimdroix EVO - TBS Discovery - rctimer Spider - Flip Sport - QAV250 - ZMR250 - Warpquad 230 - Alien 4" - Alien 6">watch this space<
xpantz is offline        Reply With Quote Quick reply to this message
Old 07-29-2015, 10:24 AM   #3 (permalink)
Registered Users
Thread Starter Thread Starter
 
My HF Map location
Join Date: May 2008
Default

I have gone thru the setup program several times and I get different results each time. So today I will try cleanflight and see if there is any difference. If not I will introduce my CC3D to my 5 lbs. sledge hammer.
WyDiablo is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1