Register Now

whoanelly · 11-24-2010, 07:16 PM

Brand new set of Support Braces, u guys see whats wrong,,

SgtGarand · 11-24-2010, 07:23 PM

One side of the ends are not turned to the side?

whoanelly · 11-24-2010, 07:44 PM

ding ding,,,sum bicches,lol...,

,,ohh well,guess i can tear em apart..

SgtGarand · 11-24-2010, 07:48 PM

the end pieces can't be turned by hand? Or maybe hold each end with some pliers and give a twist. If all else fails maybe the LHS will replace them for you

whoanelly · 11-24-2010, 08:00 PM

Ya I'm gonna crunch around the ends and see if they come apart,,then epoxy back.hobby store is to far ,not worth the gas.

whoanelly · 11-24-2010, 08:18 PM

worked perfect and allready epoxied back together..figured it would be no different then shortening the tail push rod..

Encoder · 11-25-2010, 08:25 AM

Did you heat up the linkage?

whoanelly · 11-25-2010, 02:58 PM

No,,I just took a pair of plyers and sqweezed all around it till it broke loose..then just re epoxied.

Maddog0963 · 11-25-2010, 04:16 PM

One thing I've noticed too is that I had 1 left over from a crash & I found it was shorter than the other ones

scott s · 11-25-2010, 04:52 PM

That aint nothing! The set I bought way back when with the aluminim ends were not the same length! Not even close. so I had to twist of the ends and cut the rods to the same length and epoxy them back on. I epoxy them with slow stuff and bolt every thing up and let it cure. I would rather do it that way from the start.

whoanelly · 11-25-2010, 07:49 PM

Quote:

Originally Posted by scott s

That aint nothing! The set I bought way back when with the aluminim ends were not the same length! Not even close. so I had to twist of the ends and cut the rods to the same length and epoxy them back on. I epoxy them with slow stuff and bolt every thing up and let it cure. I would rather do it that way from the start.

Lol,,funny how they can scrwe them up so bad..isn't it a dam machine. Haven't came across the one longer then the other yet,but ill keep my eye out.

Happy Thanksgiving all.

11-24-2010, 07:16 PM	#1 (permalink)
whoanelly Registered Users Join Date: Apr 2008	ohhh Eflite ,,seem something wrong here ? Brand new set of Support Braces, u guys see whats wrong,, __________________ 700LE : 105HZR AR7200BX JR8917 Multi gov , JR9503 600ESP : 100AMP Castle. Scorpion Motor . AMA #962896 400 Blade : Scorpion 2221-6 ,Castle ICE 50 Sonix Head and t Align 450 pro V2 3G MKS DS95 MSR , 2 x MCPX (brushless C05 & HP05), Blade 130X.

11-24-2010, 07:23 PM	#2 (permalink)
SgtGarand Registered Users My HF Map location Join Date: Oct 2010	One side of the ends are not turned to the side? __________________ "In my opinion, the M1 rifle is the greatest battle implement ever devised" - General George S. Patton, Jr.

11-24-2010, 07:44 PM	#3 (permalink)
whoanelly Registered Users Thread Starter Join Date: Apr 2008	ding ding,,,sum bicches,lol..., ,,ohh well,guess i can tear em apart.. __________________ 700LE : 105HZR AR7200BX JR8917 Multi gov , JR9503 600ESP : 100AMP Castle. Scorpion Motor . AMA #962896 400 Blade : Scorpion 2221-6 ,Castle ICE 50 Sonix Head and t Align 450 pro V2 3G MKS DS95 MSR , 2 x MCPX (brushless C05 & HP05), Blade 130X.

11-24-2010, 07:48 PM	#4 (permalink)
SgtGarand Registered Users My HF Map location Join Date: Oct 2010	the end pieces can't be turned by hand? Or maybe hold each end with some pliers and give a twist. If all else fails maybe the LHS will replace them for you __________________ "In my opinion, the M1 rifle is the greatest battle implement ever devised" - General George S. Patton, Jr.

11-24-2010, 08:00 PM	#5 (permalink)
whoanelly Registered Users Thread Starter Join Date: Apr 2008	Ya I'm gonna crunch around the ends and see if they come apart,,then epoxy back.hobby store is to far ,not worth the gas. __________________ 700LE : 105HZR AR7200BX JR8917 Multi gov , JR9503 600ESP : 100AMP Castle. Scorpion Motor . AMA #962896 400 Blade : Scorpion 2221-6 ,Castle ICE 50 Sonix Head and t Align 450 pro V2 3G MKS DS95 MSR , 2 x MCPX (brushless C05 & HP05), Blade 130X.

11-24-2010, 08:18 PM	#6 (permalink)
whoanelly Registered Users Thread Starter Join Date: Apr 2008	worked perfect and allready epoxied back together..figured it would be no different then shortening the tail push rod.. __________________ 700LE : 105HZR AR7200BX JR8917 Multi gov , JR9503 600ESP : 100AMP Castle. Scorpion Motor . AMA #962896 400 Blade : Scorpion 2221-6 ,Castle ICE 50 Sonix Head and t Align 450 pro V2 3G MKS DS95 MSR , 2 x MCPX (brushless C05 & HP05), Blade 130X.

11-25-2010, 08:25 AM	#7 (permalink)
Encoder Registered Users Join Date: Nov 2009	Did you heat up the linkage? __________________ Blade 400, DS35000G,GY520, DS287MGs on cyclic, CC BEC Blade MSR Blade MCX

11-25-2010, 02:58 PM	#8 (permalink)
whoanelly Registered Users Thread Starter Join Date: Apr 2008	No,,I just took a pair of plyers and sqweezed all around it till it broke loose..then just re epoxied. __________________ 700LE : 105HZR AR7200BX JR8917 Multi gov , JR9503 600ESP : 100AMP Castle. Scorpion Motor . AMA #962896 400 Blade : Scorpion 2221-6 ,Castle ICE 50 Sonix Head and t Align 450 pro V2 3G MKS DS95 MSR , 2 x MCPX (brushless C05 & HP05), Blade 130X.

11-25-2010, 04:16 PM	#9 (permalink)
Maddog0963 Registered Users My HF Map location Join Date: Jun 2010	One thing I've noticed too is that I had 1 left over from a crash & I found it was shorter than the other ones

11-25-2010, 04:52 PM	#10 (permalink)
scott s Registered Users Join Date: Apr 2010	That aint nothing! The set I bought way back when with the aluminim ends were not the same length! Not even close. so I had to twist of the ends and cut the rods to the same length and epoxy them back on. I epoxy them with slow stuff and bolt every thing up and let it cure. I would rather do it that way from the start.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in