Never flown 230 S needs help - Page 2 - HeliFreak
Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Blade Helicopters (eFlite) > Blade 230S


Blade 230S Blade 230S Helicopters Information and Help


Reply
 
LinkBack Thread Tools Display Modes
Old 10-19-2015, 02:54 PM   #21 (permalink)
Registered Users
 

Join Date: Apr 2004
Location: Cookeville, TN
Default

If you can't enter the "trim flight mode" something is wrong in the radio setup or you are not correctly entering the mode with the radio.
TMoore is online now        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 10-19-2015, 03:40 PM   #22 (permalink)
Registered Users
 
Posts: 5,234
 

Join Date: Jul 2015
Location: Racine, WI
Default

I have had no issues with the DX6 entering any mode. But I remember on the 200 SRX I could not one time. So what I did was to switch to advanced/high rates and it worked! It was not working at all on beginner mode for some reason. Seems it had to detect the positions at higher than what the low rates throw allows. I think the manual said to use the trims on throttle up with the RTF actually which may corroborate this theory. This may be done to avoid entering the mode with little stick movement and ensure the sticks are well on the corners.
__________________
Goblins: 500 Sport (Ghost) / 420 (Panthro) / 380 (Yellowbird) / DX9 BE & DX6 G2 / [Citizen 755]
Team Pilot HobbyBoost.Com YouTube: http://tinyurl.com/toadiscoil
toadiscoil is online now        Reply With Quote Quick reply to this message
Old 10-20-2015, 01:58 AM   #23 (permalink)
Registered Users
 

Join Date: Jan 2012
Location: Romania, Timisoara
Default

To enter any programming mode (trim flight, servo centering etc.) you have to have 100% d/r on the sticks
danb1974 is offline        Reply With Quote Quick reply to this message
Old 10-20-2015, 05:27 AM   #24 (permalink)
Registered Users
 
Posts: 326
 
My HF Map location
Join Date: Jun 2007
Location: in front of computer (below sea level)
Default

Quote:
Originally Posted by danb1974 View Post
To enter any programming mode (trim flight, servo centering etc.) you have to have 100% d/r on the sticks
This should be a sticky in each and every (sub)forum.

I once tried to get an ESC into program mode (and tried and tried and tried ... )
__________________
If it doesn't fit, you need a bigger hammer

nano CPX - nano CPX BL - 2 x MCPX V1 BL - 2 x MCPX BL - 230S - MQX - Gaui 330X - 4G6V-FBL - 4G6V - cX450pro - T450pro - T500 DFC - Gaui EP550 FBL
xs4reak is offline        Reply With Quote Quick reply to this message
Old 10-20-2015, 07:40 AM   #25 (permalink)
Registered Users
 

Join Date: Jan 2012
Location: Romania, Timisoara
Default

I realized after only three atempts that my d/r switched were in the wrong position...
danb1974 is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Insurance
Please select your insurance company (Optional)
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © VerticalScope Inc. All rights reserved.
 

SEO by vBSEO 3.6.1