Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Blade Helicopters (eFlite) > AH-64



Reply
 
LinkBack Thread Tools Display Modes
Old 07-06-2016, 05:38 PM   #1 (permalink)
Registered Users
 

Join Date: Apr 2011
Default 1/35 scale AH1-W Supercobra with Blade Apache Electronics

Hi All I just finished, installing the Apache Blade Mechanics into a 1/35 scale model MRC of THE AH1-W SUPER COBRA.

To get to fit I had to trim down the frame; change the rotor head to MCPXBL DFC, with extended rods for the cyclic and pith controls.
For the tail I used a direct drive tail blade (R) rimed to fit the tail adapter. Rotor Blades are from Align 250 plastic 200mm long.
Test hovers good so far, 2s lipo MicroHeli 200mah fits fine on it's side.
The picture with show the stock lipo for the Apache.

I use the same settings as the Blade Apache.
Attached Thumbnails
Click image for larger version

Name:	COBRA 2.jpg
Views:	201
Size:	92.6 KB
ID:	660747   Click image for larger version

Name:	rotorhead.png
Views:	156
Size:	98.4 KB
ID:	660749   Click image for larger version

Name:	COBRA 3.jpg
Views:	161
Size:	69.1 KB
ID:	660750   Click image for larger version

Name:	cobra project.png
Views:	164
Size:	100.1 KB
ID:	660751  
Rich571 is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 07-06-2016, 05:49 PM   #2 (permalink)
Registered Users
 

Join Date: Feb 2014
Default

That is cool!

__________________
Goblins - Mini Comet, 380, 500, 700
BK Servos, Spartan vx1e FBL units, Switch Blades
Jeti DS-16
TORCHS member, AMA 64878, Citizen 690
Mattinfla is offline        Reply With Quote Quick reply to this message
Old 07-06-2016, 09:00 PM   #3 (permalink)
Registered Users
 

Join Date: Feb 2016
Default

That is primo...
lnelson15 is offline        Reply With Quote Quick reply to this message
Old 07-11-2016, 04:15 PM   #4 (permalink)
Registered Users
 
Posts: 5,978
 

Join Date: Apr 2015
Location: Ohio
Default

Very nice work.

Where did you get that green thing the heli is sitting on?
The thing with the angles and hole size info?
(I can't remember what they are called)
__________________
DX9 - Twinn Rex AH-47 Chinook

Math is hard...
MariaFan is offline        Reply With Quote Quick reply to this message
Old 07-12-2016, 06:16 AM   #5 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Apr 2011
Default

Hobbico 18 x 24" Builder's Cutting Mat
Rich571 is offline        Reply With Quote Quick reply to this message
Old 07-12-2016, 05:10 PM   #6 (permalink)
Registered Users
 
Posts: 5,978
 

Join Date: Apr 2015
Location: Ohio
Default

Thanks!!
__________________
DX9 - Twinn Rex AH-47 Chinook

Math is hard...
MariaFan is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1